文献速递口腔修复与种植

可解释人工智能探索CAD/CAM树脂复合材料的有效成分

Interpretable AI Explores Effective Components of CAD/CAM Resin Composites.
PubMed 文献 · J Dent Res · 2022-04-15

本研究利用12种市售产品的16个属性数据,通过数据增强扩增至120个样本,构建5种机器学习模型预测CAD/CAM树脂复合材料的挠曲强度,模型R²值为0.927至0.998,相对误差均在15%以内,并通过穷举搜索和特征重要性分析识别影响挠曲强度的有效成分。

要点

  • 5种机器学习模型预测挠曲强度的R²值为0.927至0.998,所有算法相对误差在15%以内。
  • 穷举搜索高预测挠曲强度组中,所有配方均含氨基甲酸酯二甲基丙烯酸酯。
  • 特征重要性分析中,填料含量和三乙二醇二甲基丙烯酸酯为所有模型的前2位特征。

核心结论

  • 所建立的机器学习模型成功预测了CAD/CAM树脂复合材料的挠曲强度,并基于可用数据集识别了影响挠曲强度的有效成分。

研究设计与样本

  • 从制造商和文献收集12种市售产品的组成与挠曲强度,初始数据含16个属性和12个样本。
  • 将每个样本输入视为多维向量,为每个向量设定0.1的波动范围,将样本量扩增至120。
  • 使用随机森林、极端随机树、梯度提升决策树、轻量梯度提升机和极端梯度提升5种回归算法开发预测挠曲强度的机器学习模型。

主要发现

  • 随机森林、极端随机树、梯度提升决策树、轻量梯度提升机和极端梯度提升模型的R²值分别为0.947、0.997、0.998、0.983和0.927。
  • 所有算法的相对误差均在15%以内。
  • 穷举搜索的高预测挠曲强度组中,氨基甲酸酯二甲基丙烯酸酯存在于所有配方中。
  • 特征重要性分析中,所有模型预测的前2位特征为填料含量和三乙二醇二甲基丙烯酸酯。
  • 除随机森林模型外,ZrSiO4为所有模型的第3位重要特征。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

High flexural strength of computer-aided manufacturing resin composite blocks (CAD/CAM RCBs) are required in clinical scenarios. However, the conventional in vitro approach of modifying materials' composition by trial and error was not efficient to explore the effective components that contribute to the flexural strength. Machine learning (ML) is a powerful tool to achieve the above goals. Therefore, the aim of this study was to develop ML models to predict the flexural strength of CAD/CAM RCBs and explore the components that affect flexural strength as the first step. The composition of 12 commercially available products and flexural strength were collected from the manufacturers and literature. The initial data consisted of 16 attributes and 12 samples. Considering that the input data for each sample were recognized as a multidimensional vector, a fluctuation range of 0.1 was proposed for each vector and the number of samples was augmented to 120. Regression algorithms-that is, random forest (RF), extra trees, gradient boosting decision tree, light gradient boosting machine, and extreme gradient boosting-were used to develop 5 ML models to predict flexural strength. An exhaustive search and feature importance analysis were conducted to analyze the effective components that affected flexural strength. The R2 values for each model were 0.947, 0.997, 0.998, 0.983, and 0.927, respectively. The relative errors of all the algorithms were within 15%. Among the high predicted flexural strength group in the exhaustive search, urethane dimethacrylate was contained in all compositions. Filler content and triethylene glycol dimethacrylate were the top 2 features predicted by all models in the feature importance analysis. ZrSiO4 was the third important feature for all models, except the RF model. The ML models established in this study successfully predicted the flexural strength of CAD/CAM RCBs and identified the effective components that affected flexural strength based on the available data set.

来源:J Dent Res,查看原文。版权归原作者所有。

引用

  1. Li H, Sakai T, Tanaka A, et al. Interpretable AI Explores Effective Components of CAD/CAM Resin Composites. J Dent Res. 2022. PMID: 35426349. doi:10.1177/00220345221089251

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。