外科导板辅助引导骨增量:一项体外研究
本研究在3D打印模型上体外验证外科导板辅助水平牙槽骨缺损骨增量的准确性,6例锥形束CT扫描数据由两名术者分别采用常规法和导板法各完成两次手术,导板法显著减少计划外植骨体积(36.8%±14.1 vs 19.6%±12.3,p<.01),但手术时间增加2分26秒。
要点
- 导板法计划外植骨体积显著低于常规法(36.8%±14.1 vs 19.6%±12.3,p<.01)。
- 导板法在多个测量点提高植骨准确性,减少过度填充。
- 使用导板时手术时间显著增加,差异为2分26秒。
核心结论
- 该体外研究技术可提高植骨形态准确性、更好地压实植骨材料冠部并减少计划外植骨材料量。
研究设计与样本
- 体外研究,基于6例需水平骨增量患者的锥形束CT扫描数据分段并3D打印模型。
- 两名术者分别使用常规方案或导板方案,每例各完成两次骨增量手术,术前均虚拟规划目标植骨形态。
主要发现
- 导板法计划外植骨体积显著少于常规法(36.8%±14.1 vs 19.6%±12.3,p<.01)。
- 导板法在多个测量点提高植骨准确性,减少过度填充:最冠部点1.7±1.7 mm、25%处0.2 mm±1.4、50%处0.0 mm±0.9、75%处0.1 mm±1.1、根尖部0.4 mm±1.4。
- 距计划植骨冠方1 mm处植骨厚度增加(2.8 mm±2.3 vs 1.8 mm±2.2,p=.04)。
- 使用导板时手术时间显著增加,差异为2分26秒。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIM: To validate in vitro the accuracy of a novel method for bone augmentation of horizontal alveolar bone defects with the help of a surgical guide. MATERIAL AND METHODS: Six cone-beam computed tomography scans of patients requiring horizontal bone augmentation were segmented and 3D printed. Two surgeons performed the bone augmentation surgery twice for each case on 3D-printed models, using either a conventional or guided protocol. Each surgeon virtually planned the desired graft shape beforehand. The resulting grafts were compared linearly and volumetrically to the plan; graft density and surgical time were also analyzed. RESULTS: There was significantly less graft volume outside the planned volume with the guided protocol (36.8% ± 14.1 vs. 19.6% ± 12.3, p < .01). The use of a guide increased graft accuracy at several measurement points, resulting in less overfill when using the guided protocol (1.7 ± 1.7 mm at the most coronal point, 0.2 mm ± 1.4 at 25%, 0.0 mm ± 0.9 at 50%, 0.1 mm ± 1.1 at 75%, and 0.4 mm ± 1.4 apically). Graft thickness was increased 1 mm coronally from the planned graft (2.8 mm ± 2.3 vs. 1.8 mm ± 2.2, p = .04). Surgical time increased significantly when using a guide (a difference of 2 m 26 s). CONCLUSION: The technique, tested here in vitro, allows surgeons to improve the accuracy of the resulting graft shape, to better compact material in the coronal portion of the graft, and to reduce the amount of graft material placed outside the planned volume.
引用
- Tarce M, Merheb J, Meeus M, et al. Surgical guides for guided bone augmentation: An in vitro study. Clin Oral Implants Res. 2022. PMID: 35266206. doi:10.1111/clr.13916
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。