基于增强现实导航、静态计算机辅助种植手术与徒手方法种植体植入精度的体外研究
本体外研究在3D打印模型上随机分组比较增强现实(AR)动态导航、徒手和静态计算机辅助种植手术(CAIS)三种方法植入种植体的精度,共植入48枚种植体(每组16枚)。结果显示AR导航精度与静态CAIS无显著差异,且全局偏差显著低于徒手方法。作者认为AR导航在模型手术中可获得与静态CAIS相当的精度并优于徒手方法,但需进一步临床研究确定可行性。
要点
- AR动态导航组角度偏差4.09±2.79°、冠部偏差1.27±0.40 mm、根尖全局偏差1.34±0.41 mm,与静态CAIS组无显著差异。
- 静态CAIS组角度偏差3.21±1.52°、冠部偏差1.31±0.42 mm、根尖全局偏差1.38±0.41 mm。
- 徒手组冠部全局偏差1.93±0.79 mm、根尖全局偏差2.28±0.74 mm,显著高于AR动态导航组。
核心结论
- AR动态导航的种植体定位精度与静态CAIS相当,并优于徒手方法。
- 作者认为在模型手术中实施AR动态CAIS可获得与静态CAIS相当且优于徒手方法的种植体定位精度。
- 作者指出需进一步临床研究以确定AR动态导航的可行性。
研究设计与样本
- 体外研究,在3D打印研究模型上随机分为三组。
- 第1组采用基于增强现实(AR)的动态导航(Innooral System,Innoimplant Ltd,匈牙利布达佩斯)。
- 第2组采用徒手方法植入。
- 第3组采用静态计算机辅助种植手术(CAIS,coDiagnostiX软件10.4版,Dental Wings,加拿大蒙特利尔)。
- 共植入48枚种植体(Callus Pro,Callus Implant Solutions GmbH,德国汉堡),每组16枚、每4个模型。
主要发现
- AR动态导航组与静态CAIS组角度偏差分别为4.09±2.79°与3.21±1.52°,无显著差异。
- AR动态导航组与静态CAIS组冠部偏差分别为1.27±0.40 mm与1.31±0.42 mm,无显著差异。
- AR动态导航组与静态CAIS组根尖全局偏差分别为1.34±0.41 mm与1.38±0.41 mm,无显著差异。
- AR动态导航组冠部全局偏差1.27±0.40 mm、根尖全局偏差1.34±0.41 mm,显著低于徒手组的1.93±0.79 mm与2.28±0.74 mm。
关键数值与推荐
- 主要结局指标为角度偏差、冠部全局偏差和根尖全局偏差,基于术前手术计划注册与术后锥形束CT(CBCT)重建计算。
临床怎么用
- 作者认为在模型手术中实施AR动态CAIS可获得与静态CAIS相当且优于徒手方法的种植体定位精度。
- 作者指出需进一步临床研究以确定AR动态导航的可行性。
局限性
- 原文报告需进一步临床研究以确定AR动态导航的可行性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: This in vitro study aimed to compare the accuracy of implant placement in model surgeries carried out by implementation of three different methods. METHODS: An in vitro study was conducted on 3D printed study models randomly assigned to three study groups. In Group 1, model surgeries were assisted by augmented reality (AR)based dynamic navigation (Innooral System, Innoimplant Ltd, Budapest, Hungary). In Group 2, implants were placed with a free-hand method, and in Group 3, static Computer Assisted Implant Surgery (CAIS) was used (coDiagnostiX software, version 10.4 Dental Wings, Montreal, CA, USA). A total of 48 dental implants (Callus Pro, Callus Implant Solutions GmbH, Hamburg, Germany) were placed (16 implants in four models per study group). The primary outcome variables were angular deviation, coronal, and apical global deviation. These were calculated for all implants based on preoperative registration of the surgical plan and postoperative cone beam computed tomography (CBCT) reconstruction. RESULTS: The accuracy of implant placement using AR-based dynamic navigation showed no significant difference compared to static CAIS (angular deviation, 4.09 ± 2.79° and 3.21 ± 1.52°; coronal deviation, 1.27 ± 0.40 mm and 1.31 ± 0.42 mm; and apical global deviation 1.34 ± 0.41 mm and 1.38 ± 0.41 mm). Global deviation results were significantly lower with AR-based dynamic navigation than with the free-hand approach (coronal and apical global deviation of 1.93 ± 0.79 mm and 2.28 ± 0.74 mm, respectively). CONCLUSIONS: Implant positioning accuracy of AR-based dynamic navigation was comparable to that of static CAIS and superior to that obtained by the free-hand approach. CLINICAL SIGNIFICANCE: Implementing Augmented Reality based dynamic Computer Assisted Implant Surgery (CAIS) in model surgeries may allow to obtain an implant positioning accuracy comparable to that provided by static CAIS, and superior to that obtained through the free-hand approach. Further clinical studies are necessary to determine the feasibility of AR-based dynamic navigation.
引用
- Kivovics M, Takács A, Pénzes D, et al. Accuracy of dental implant placement using augmented reality-based navigation, static computer assisted implant surgery, and the free-hand method: An in vitro study. J Dent. 2022. PMID: 35183695. doi:10.1016/j.jdent.2022.104070
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。