文献速递牙体牙髓病

直线通路微创开髓洞型对上颌第一前磨牙力学性能影响的有限元分析

[Effect of straight-line minimally invasive access cavity on the mechanical properties of maxillary first premolars: a finite element analysis].
PubMed 文献 · Zhonghua Kou Qiang Yi Xue Za Zhi · 2022-01-01

该研究基于20颗上颌第一前磨牙的显微CT数据三维重建,模拟传统开髓、桁架开髓与直线通路微创开髓三种洞型及根管治疗后行有限元分析。结果显示桁架开髓与直线通路微创开髓均可降低牙颈部von Mises应力峰值,且两者间无显著差异;作者认为直线通路微创开髓可保护力学性能,具有一定临床可行性。

要点

  • 直线通路微创开髓与桁架开髓均较传统开髓降低牙颈部应力峰值。
  • 直线通路微创开髓与桁架开髓间牙颈部应力峰值无显著差异。
  • 作者认为直线通路微创开髓具有一定临床可行性。

核心结论

  • 直线通路微创开髓洞型设计可保护根管治疗后上颌第一前磨牙的力学性能,可能具有一定的临床可行性。

研究设计与样本

  • 收集2018年6月至2020年6月于四川大学华西口腔医院口腔颌面外科就诊患者因正畸或牙周病拔除的上颌第一前磨牙,选取牙体完整、根尖孔发育完成的双根管牙20颗进行显微CT三维重建。
  • 在三维模型中模拟传统开髓洞型、桁架开髓洞型与直线通路微创开髓洞型及根管治疗,每组样本量均为20个。
  • 建模后进行有限元分析,记录纵向及斜向负载模式下各组模型牙颈部von Mises等效应力峰值并观测应力分布模式。

主要发现

  • 纵向负载下牙颈部颊侧和腭侧von Mises应力峰值:桁架开髓组颊侧(146.0±12.9)MPa、腭侧(167.6±15.9)MPa,直线通路微创开髓组颊侧(142.6±13.7)MPa、腭侧(168.1±17.4)MPa,传统开髓组颊侧(188.7±13.4)MPa、腭侧(200.9±25.7)MPa。
  • 与传统开髓组相比,桁架开髓组颊侧(t=9.01,P<0.001)和腭侧(t=4.59,P<0.001)及直线通路微创开髓组颊侧(t=9.64,P<0.001)和腭侧(t=3.76,P=0.004)牙颈部应力峰值均降低。
  • 纵向负载下直线通路微创开髓还缓解应力在(牙合)面集中力加载区域、牙颈部及牙根的集中,斜向负载下得到相似结果。
  • 两种负载模式下桁架开髓组与直线通路微创开髓组颊腭侧牙颈部应力峰值差异均无统计学意义(P>0.05)。

临床怎么用

  • 作者认为直线通路微创开髓洞型设计可保护根管治疗后上颌第一前磨牙的力学性能,具有一定的临床可行性。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Objective: To investigate the effects of straight-line minimally invasive access cavity on the mechanical properties of endodontically treated maxillary first premolars using finite element analysis. Methods: Micro-CT data of twenty maxillary first premolars were collected for three-dimensional reconstruction. Three access cavities, including the conventional access cavity (ConvAC), the truss access cavity (TrussAC) and the straight-line minimally invasive access cavity (SMIAC), as well as the root canal treatment procedure, were simulated in all the 20 reconstruction samples of three-dimensional models, respectively. The peak von Mises stress on the cervical area of each model, as well as the stress distribution under vertical and oblique loading circumstances, were subsequently determined by using finite element analysis. Results: In comparison to the stresses of ConvAC [buccal cervical (BC): (188.7±13.4) MPa, palatal cervical (PC): (200.9±25.7) MPa], the stresses of TrussAC [BC: (146.0±12.9) MPa, PC: (167.6±15.9) MPa] (t=9.01, P<0.001; t=4.59, P<0.001) and SMIAC [BC: (142.6±13.7) MPa, PC: (168.1±17.4) MPa] (t=9.64, P<0.001; t=3.76, P=0.004) significantly reduced the peak von Mises stress on the cervical area of the maxillary first premolars after root canal treatment. Under vertical loading conditions, SMIAC also reduced the central tendency of stresses on the occlusal surface, cervical area and root. In the case of oblique loading conditions, similar results were observed. Under both loading conditions, there was no significant difference in the peak von Mises stress on the cervical area of the maxillary first premolar between TrussAC and SMIAC groups. Conclusions: The design of SMIAC could preserve the mechanical properties of the maxillary first premolar following root canal treatment, which might have certain clinical feasibility. 目的: 通过有限元分析探讨直线通路微创开髓洞型对上颌第一前磨牙力学性能的影响。 方法: 收集2018年6月至2020年6月于四川大学华西口腔医院口腔颌面外科就诊患者因正畸或牙周病拔除的上颌第一前磨牙,从中选取牙体完整、根尖孔发育完成的双根管牙20颗,对其显微CT(micro-CT)数据进行三维重建,在三维模型中模拟传统开髓洞型、桁架开髓洞型与直线通路微创开髓洞型的开髓与根管治疗(每组样本量均为20个)。建模完成后进行有限元分析,记录纵向及斜向负载模式下各组模型的牙颈部von Mises等效应力峰值(VM)并观测各组模型的应力分布模式。 结果: 纵向负载模式下,3种开髓洞型牙颈部颊侧和腭侧VM分别为:桁架开髓洞型[(146.0±12.9)和(167.6±15.9)MPa],直线通路微创开髓洞型[(142.6±13.7)和(168.1±17.4)MPa],传统开髓洞型[(188.7±13.4)和(200.9±25.7)MPa]。与传统开髓洞型相比,桁架开髓洞型(t=9.01,P<0.001;t=4.59,P<0.001)和直线通路微创开髓洞型(t=9.64,P<0.001;t=3.76,P=0.004)均可有效降低根管治疗后上颌第一前磨牙颊侧和腭侧牙颈部VM,同时缓解应力在(牙合)面集中力加载区域、牙颈部及牙根的集中。在斜向负载模式下得到了相似的结果。在两种负载模式下,桁架开髓洞型与直线通路微创开髓洞型间颊腭侧牙颈部VM差异均无统计学意义(P>0.05)。 结论: 直线通路微创开髓洞型可以有效保护根管治疗后上颌第一前磨牙的力学性能,具有一定的临床可行性。.

来源:Zhonghua Kou Qiang Yi Xue Za Zhi,查看原文。版权归原作者所有。

引用

  1. Gao YX, Zhang L, Zhou XD, et al. [Effect of straight-line minimally invasive access cavity on the mechanical properties of maxillary first premolars: a finite element analysis]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2022. PMID: 35012252. doi:10.3760/cma.j.cn112144-20210927-00441

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。