双根下颌第一磨牙不同开髓洞形去除组织量与生物力学分析的多样本三维有限元比较
本研究以20颗双根下颌第一磨牙的微计算机断层扫描数据建立三维有限元模型,比较传统开髓洞形、保守开髓洞形与直线微创开髓洞形去除的冠部组织量及颈部最大应力,并分析两者相关性。结果显示微创与保守开髓洞形去除的冠部组织和牙颈部牙本质少于传统开髓洞形,颈部最大应力显著更小,组织损失量与颈部最大应力正相关。
要点
- 微创与保守开髓洞形去除的冠部组织及牙颈部牙本质均少于传统开髓洞形。
- 微创与保守开髓洞形的颈部平均最大应力显著小于传统开髓洞形。
- 硬组织与牙颈部牙本质损失量与该牙颈部最大应力呈正相关。
核心结论
- 在下颌第一磨牙中,采用微创开髓洞形减少冠部牙体组织和牙颈部牙本质的损失,可能有利于提高牙髓治疗后的抗折性。
- 直线微创开髓洞形可能是兼顾生物力学性能与临床便利性的一种选择。
研究设计与样本
- 研究纳入20颗双根下颌第一磨牙的微计算机断层扫描数据作为三维建模原型。
- 建立未处理牙、传统开髓洞形、保守开髓洞形和直线微创开髓洞形四类模型。
- 每种模型施加3种载荷以模拟咬合功能状态,记录并分析去除组织量与颈部最大应力及其相关性。
主要发现
- 直线微创开髓洞形和保守开髓洞形去除的冠部组织及牙颈部牙本质少于传统开髓洞形。
- 直线微创开髓洞形和保守开髓洞形的颈部平均最大应力显著小于传统开髓洞形。
- 硬组织与牙颈部牙本质损失量与该牙颈部最大应力呈正相关。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
INTRODUCTION: The aim of this study was to compare the biomechanical properties and the amount of coronal tissue removed among the different access cavities with a multisample 3-dimensional finite element analysis in the mandibular first molar. The correlation between the amount of tissue removed and the fracture resistance of the teeth was also analyzed. METHODS: Micro-computed tomography data from 20 2-rooted mandibular first molars were included in this study as 3-dimensional modeling prototypes. Models of untreated molars and molars treated with the traditional access cavity (TradAC), the conservative access cavity (ConsAC), and the straight-line minimally invasive endodontic access cavities (SMIAC) were created. Each model was loaded in 3 ways to simulate the functional conditions of occlusion. The amount of tissue removed and the maximum stress in the cervical region were recorded and analyzed, and the correlation between them was also analyzed. RESULTS: The amount of coronal tissue and pericervical dentin (PCD) removed in SMIAC and ConsAC was less than that of TradAC. The mean maximum stress in the cervical region was significantly smaller in SMIAC and ConsAC than in TradAC. The amount of hard tissue and PCD loss was positively correlated with the maximum stress in the cervical region of the tooth. CONCLUSIONS: In mandibular first molars, it could be beneficial to improve the fracture resistance of the tooth after endodontic treatment by the minimally invasive access cavity to reduce the loss of coronal tooth tissue and PCD. The SMIAC may be an option balancing biomechanical properties and clinical convenience.
引用
- Fu Y, Zhang L, Gao Y, et al. A Comparison of Volume of Tissue Removed and Biomechanical Analysis of Different Access Cavity Designs in 2-rooted Mandibular First Molars: A Multisample 3-dimensional Finite Element Analysis. J Endod. 2021. PMID: 34953797. doi:10.1016/j.joen.2021.12.007
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。