口腔颌面外科三维打印导板的设计与应用
结论认为三维打印导板有助于精准快捷完成手术,但其设计、制作等环节仍需进一步规范和改进。
要点
- 下颌骨肿瘤手术及放射粒子植入手术导板组手术时间显著少于相应常规组(P<0.05)。
- 正颌双颌手术及颞下颌关节置换手术导板组手术时间与相应常规组差异均无统计学意义(P>0.05)。
- 下颌骨肿瘤手术及颞下颌关节置换手术导板组标志点位移距离均显著小于相应常规组(P<0.05)。
核心结论
- 口腔颌面外科手术三维打印系列导板的应用有助于精准、快捷地完成手术,但其设计、制作等环节仍需进一步规范和改进。
研究设计与样本
- 包括40例下颌骨肿瘤手术患者(常规组20例、导板组20例)、20例颞下颌关节置换手术患者(常规组10例、导板组10例)、20例正颌双颌手术患者(常规组10例、导板组10例)、20例放射粒子植入手术患者(常规组10例、导板组10例)。
- 患者中位年龄45岁(16~75岁),其中男性58例,女性42例。
- 所有导板组患者术前均进行螺旋CT扫描并建立颌骨及供骨区三维模型(上颌骨和下颌骨模型各40个)以模拟手术,计算机辅助设计手术导板(包括截骨及定位成形导板共40套、穿刺定位导板10个)。
主要发现
- 下颌骨肿瘤手术导板组手术时间为(6.02±0.55)h,显著少于常规组(6.99±1.10)h(P<0.05)。
- 放射粒子植入手术导板组手术时间为(0.89±0.15)h,显著少于CT引导组(1.91±0.55)h(P<0.05)。
- 正颌双颌手术及颞下颌关节置换手术导板组手术时间与相应常规组差异均无统计学意义(P>0.05)。
- 下颌骨肿瘤手术及颞下颌关节置换手术导板组标志点位移距离均显著小于相应常规组(P<0.05)。
- 正颌双颌手术及放射粒子植入手术导板的误差基本在1 mm以内。
关键数值与推荐
- 下颌骨肿瘤手术导板设计时间为(2.8±1.8)d,颞下颌关节置换手术导板为(2.2±0.3)d,正颌双颌手术导板为(2.9±1.8)d,放射粒子植入手术导板为(0.9±0.3)d。
- 上颌骨模型打印时间为(11.1±1.6)h,下颌骨模型打印时间为(2.6±0.4)h。
- 截骨及定位成形导板打印时间为(2.5±0.8)h,穿刺定位导板打印时间为(1.1±0.4)h。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Objective: To explore the application of three-dimensional (3D) printing technology in oral and maxillofacial surgery, so as to optimize and standardize its design and application. Methods: From January 2010 to December 2020, 40 cases of mandibular tumor surgery (20 cases of conventional group and 20 cases of guide plate group), 20 cases of temporomandibular joint replacement surgery (10 cases of conventional group and 10 cases of guide plate group), 20 cases of malocclusion surgery (10 cases of conventional group and 10 cases of guide plate group), 20 cases of radioactive particle implantation surgery (10 cases of CT guided group and 10 cases of guide plate group) were analyzed. All patients in the guide plate group were scanned with spiral CT, and the 3D models of the jaw and the donor bone area were reconstruction. According to the purpose of surgical guide, the design and clinical application of osteotomy guide, in place forming guide and puncture positioning guide were analyzed respectively. The design time of guide plate, the performance and printing time of guide material, the sterilization method of guide and its influence on accuracy, and the influence of guide application on operation time and accuracy were analyzed. Results: The design time of orthognathic guide plate was (2.9±1.8) d, and the design time of mandibular transplantation guide plate was (2.8±1.8) d, that of the temporomandibular joint replacement guide plate and the puncture guide plate was (2.2±0.3) and (0.9±0.3) d. The average printing time of the 40 maxilla model was (11.1±1.6) h, and that of the 40 mandible models was (2.6±0.4) h. The average printing time of the 40 sets of osteotomy and positioning guide plate was (2.5±0.8) h, and that of the 10 puncture positioning guide plate (1.1±0.4) h. The operation time of the conventional group was (6.99±1.10) and (6.02±0.55) h. In the CT guided group, the operation time was (1.91±0.55) h and (0.89±0.15). The operation time of mandible tumor operation and radioactive particle implantation in the guide plate group was less than that in the control group (P<0.05), and there was no significant difference in the operation time of orthognathic surgery and joint replacement between the two groups (P>0.05). The displacement distance of the mark points in the TMJ replacement and mandibular tumor operation guide group was less than that in the control group (P<0.05), and the error of the guide plate in orthognathic operation and particle implantation operation was basically less than 1 mm. Conclusions: The application of the surgical guide plate made by 3D printing technology helps to complete the operation more safely, accurately and quickly, But its design, manufacture and disinfection still need to be further standardized and improved. 目的: 探讨三维打印导板在口腔颌面外科中的临床应用并对其设计及应用进行优化和规范。 方法: 回顾性分析2010年1月至2020年12月于解放军总医院口腔颌面外科进行手术的患者资料,包括40例下颌骨肿瘤手术患者(常规组20例、导板组20例)、20例颞下颌关节置换手术患者(常规组10例、导板组10例)、20例正颌双颌手术患者(常规组10例、导板组10例)、20例放射粒子植入手术患者(常规组10例、导板组10例);患者中位年龄45岁(16~75岁),其中男性58例,女性42例。所有导板组患者术前均进行螺旋CT扫描并建立颌骨及供骨区三维模型(上颌骨和下颌骨模型各40个)以模拟手术,计算机辅助设计手术导板(包括截骨及定位成形导板共40套、穿刺定位导板10个)。分析模型打印时间以及各导板的设计时间、打印时间、导板应用对手术时间及手术精度的影响。 结果: 下颌骨肿瘤手术、颞下颌关节置换手术、正颌双颌手术、放射粒子植入手术的手术导板设计时间分别为(2.8±1.8)、(2.2±0.3)、(2.9±1.8)和(0.9±0.3)d。上颌骨模型和下颌骨模型打印时间为(11.1±1.6)和(2.6±0.4)h,截骨及定位成形导板打印时间为(2.5±0.8)h,穿刺定位导板打印时间为(1.1±0.4)h。下颌骨肿瘤手术及放射粒子植入手术导板组手术时间[分别为(6.02±0.55)和(0.89±0.15)h]均显著少于相应常规组[分别为(6.99±1.10)和(1.91±0.55)h](P<0.05),正颌双颌手术及颞下颌关节置换手术导板组手术时间与相应常规组差异均无统计学意义(P>0.05)。下颌骨肿瘤手术及颞下颌关节置换手术导板组标志点位移距离均显著小于相应常规组(P<0.05),正颌双颌手术及放射粒子植入手术导板的误差基本在1 mm以内。 结论: 口腔颌面外科手术三维打印系列导板的应用有助于精准、快捷地完成手术,但其设计、制作等环节仍需进一步规范和改进。.
引用
- Liu HH, Li YF, Mu XD, et al. [Design and application of three-dimensional printing guide plate for oral and maxillofacial surgery]. Zhonghua Kou Qiang Yi Xue Za Zhi. 2021. PMID: 34763403. doi:10.3760/cma.j.cn112144-20210308-00104
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。