文献速递口腔修复与种植口腔颌面外科

牙冠覆盖范围对部分无牙颌模型静态引导种植手术精度的影响:一项体外研究

The influence of crown coverage on the accuracy of static guided implant surgery in partially edentulous models: An in vitro study.
PubMed 文献 · J Dent · 2021-11-03

本研究在五种部分无牙颌丙烯酸模型上,比较减量牙冠覆盖(RCC)、标准牙冠覆盖(SCC)和扩展牙冠覆盖(ECC)手术导板对静态计算机辅助种植手术精度的影响,共制作120个模型和120个导板,植入168枚骨水平Straumann复制种植体。结果显示,单颗后牙缺失时RCC组冠向和根向偏差大于SCC和ECC组(p < .05),多颗牙缺失时三组无差异(p > .05)。作者认为导板牙冠覆盖范围可显著影响后牙单间隙种植精度,覆盖延伸至倒凹线可能是静态引导手术的最佳选择。

要点

  • 单颗后牙缺失时,RCC组冠向和根向偏差大于SCC和ECC组(p < .05)。
  • 单颗前牙缺失及多颗牙缺失时,RCC、SCC和ECC三组间无统计学显著差异(p > .05)。
  • 作者认为牙冠覆盖延伸至倒凹线的导板可能是静态引导手术的最佳选择。

核心结论

  • 当种植体植入后牙单间隙时,导板的牙冠覆盖范围可显著影响引导手术的精度。
  • 牙冠覆盖延伸至倒凹线的导板可能是静态引导手术的最佳选择。

研究设计与样本

  • 体外研究,制作五种部分无牙颌情况的丙烯酸模型。
  • 使用coDiagnostiX软件设计并制作减量牙冠覆盖(RCC)、标准牙冠覆盖(SCC)和扩展牙冠覆盖(ECC)三种手术导板。
  • 共制作120个模型和120个导板,由具有10年以上经验的牙科医生植入168枚骨水平Straumann复制种植体(4.1 × 10 mm)。
  • 术后扫描种植体位置并与预规划虚拟位置比较,测量角度、冠向和根向偏差,采用单因素方差分析和Tukey检验进行统计分析。

主要发现

  • 单颗牙缺失前牙位点,RCC组与SCC组和ECC组相似。
  • 单颗牙缺失前磨牙或磨牙位点,SCC和ECC组间无统计学显著差异(p > .05),RCC组冠向和根向偏差更大(p < .05)。
  • 多颗牙缺失情况,RCC、SCC和ECC组间无差异(p > .05)。
  • 五种无牙颌情况在不同牙冠覆盖范围间未发现差异(p > .05)。

临床怎么用

  • 作者认为,牙冠覆盖延伸至倒凹线的导板可能是静态引导手术的最佳选择。
  • 作者指出,设计手术导板时应考虑牙冠覆盖范围。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: To evaluate the influence of crown coverage of surgical guides on the accuracy of static computer-assisted implant surgeries (sCAISs) in different partially edentulous situations. METHODS: Acrylic models with five types of partially edentulous situations were fabricated in this study. In coDiagnostiX software (Dental Wings, Montreal, Canada), surgical templates were designed and fabricated with reduced crown coverage (RCC), standard crown coverage (SCC) and extended crown coverage (ECC). Then, fully guided implant placement into the acrylic models was performed by dental surgeons with more than 10 years of experience. In total, 120 models and 120 guides were manufactured, and 168 bone-level Straumann replica implants (4.1 × 10 mm, Institut Straumann AG, Basel, Switzerland) were inserted. Postoperative implant positions were scanned (Trios 3, 3 shape, Copenhagen, Denmark) and compared with the preplanned virtual positions via coDiagnostiX (Dental Wings, Montreal, Canada). The angular, coronal and apical deviations were measured and analyzed to evaluate the accuracy of implant insertion. Statistical analysis was performed using one-way ANOVA and Tukey's test. RESULTS: For single tooth missing situations, the RCC group was similar to the SCC group and ECC group in anterior sites. In premolar or molar sites, the SCC and ECC groups had no statistically significant difference (p > .05), while the RCC group had more coronal and apical deviation (p < .05). For multiple teeth missing situations, there was no difference among the RCC, SCC and ECC groups (p > .05). No difference was found among the five edentulous situations with different CCs (p > .05). CONCLUSION: The CC of templates can significantly affect the accuracy of guided surgeries when implants are inserted in a single gap at posterior sites. Templates with CC extended to the undercut line may be an optimal choice for static guided surgeries. CLINICAL SIGNIFICANCE: The accuracy of static guided implant surgery can be influenced by the CC of templates, and proper CC with the guide covering extending to the undercut line may contribute to improved accuracy. CC should be taken into consideration when designing surgical templates.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Wang ZY, Chao JR, Zheng JW, et al. The influence of crown coverage on the accuracy of static guided implant surgery in partially edentulous models: An in vitro study. J Dent. 2021. PMID: 34742831. doi:10.1016/j.jdent.2021.103882

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。