文献速递口腔修复与种植

比较数字化与常规工作流程用于后牙单颗种植修复的患者报告结局指标:一项随机对照试验

Patient-reported outcome measures (PROMs) comparing digital and conventional workflows for treatment with posterior single-unit implant restorations: A randomized controlled trial.
PubMed 文献 · J Dent · 2021-10-30

这项随机对照试验将40例后牙单颗种植冠患者随机分为口内光学扫描的完全数字化组(20例)与常规印模组(20例),每组再按修复材料分为二硅酸锂或聚合物渗透陶瓷网络亚组。患者报告结局显示数字化组在取模环节满意度更高,尤其「味觉刺激」方面差异有统计学意义(p=0.036),两种修复材料间无显著差异,功能种植修复评分在各亚组间结果相似。

要点

  • 数字化取模较常规印模的患者满意度更高,尤其味觉刺激方面差异有统计学意义(p=0.036)。
  • 二硅酸锂与聚合物渗透陶瓷网络两种修复材料对患者满意度无显著影响。
  • 功能种植修复评分在各亚组间结果相似。

核心结论

  • 在本研究局限内,完全数字化与常规方案在后牙单颗种植冠修复中均提供较高患者满意度。
  • 修复材料二硅酸锂与聚合物渗透陶瓷网络不影响患者对治疗的满意度。
  • 作者指出需要对修复体满意度进行长期随访以得出更具体结论。

研究设计与样本

  • 随机对照试验,纳入40例需后牙单颗种植冠修复的患者,随机分为数字化组(n=20)与常规组(n=20)。
  • 每组再等分为二硅酸锂(LS2,N!CE®)与聚合物渗透陶瓷网络(PICN,Enamic®)两个亚组。
  • 取模后及修复体戴入1周后采用视觉模拟量表(VAS)的患者报告结局问卷评估满意度。
  • 由独立修复科医师使用功能种植修复评分(FIPS)对最终种植修复体进行客观评估。
  • 采用Mann-Whitney U检验,显著性水平设为α=0.05。

主要发现

  • 取模技术的患者报告结局显示,口内光学扫描(IOS)组满意度高于常规印模组,尤其「味觉刺激」方面差异有统计学意义(p=0.036)。
  • 两种修复CAD/CAM材料之间未发现显著差异。
  • 各亚组间FIPS均值结果相似。

关键数值与推荐

  • 取模满意度评估包括6个维度:时长、舒适度、焦虑、味觉、恶心和疼痛。
  • 最终修复体满意度评估包括4个维度:整体治疗结果、功能性、美学和清洁性。
  • 统计学显著性水平设为α=0.05。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文在结论中写明「在本研究局限内」。
  • 作者指出需要对修复体满意度进行长期随访以得出更具体结论。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: The aim of this randomized controlled trial (RCT) was to analyze patient-reported outcome measures (PROMs) of prosthetic therapy with monolithic implant crowns in completely digital workflows (test) with intraoral optical scanning (IOS) and conventional workflows (control) with conventional impressions. Secondary, an objective evaluation of the final implant restorations was performed using the Functional Implant Prosthodontic Score (FIPS). MATERIALS AND METHODS: Forty patients who required an implant-supported single crown on posterior regions were randomly divided into test (n = 20) and control (n = 20) groups for impression taking. Each group was then equally separated into two subgroups according to the restorative material used: lithium disilicate (LS2, N!CE®, Straumann AG, Basel, Switzerland) or polymer-infiltrated ceramic networks (PICN, Enamic®, Vita, Bad Säckingen, Germany). Patient satisfaction was evaluated using PROM questionnaires with visual analog scales (VAS) after impression-taking and 1 week after prosthetic delivery. Patient satisfaction with the impression technique was assessed in six domains: length, comfort, anxiety, taste, nausea, and pain, whereas patient satisfaction with the final restoration was assessed in four domains: overall treatment outcome, functionality, esthetics, and cleanability. In addition, the final implant restorations were objectively assessed by an independent prosthodontist using the FIPS. Mann-Whitney U test was used to analyze the defined outcomes. Statistical analysis was completed with a level of significance set at α=0.05. RESULTS: PROMs focusing on the impression technique demonstrated higher levels of patient satisfaction for IOS compared to conventional impressions, especially in terms of "taste irritation" (p = 0.036); whereas no significant differences were found between both restorative CAD/CAM-materials. Mean FIPS values demonstrated similar results among subgroups. CONCLUSIONS: Within the limitation of this study, both completely digital and conventional protocols provided great levels of patient satisfaction in implant rehabilitation of single-tooth gaps in posterior sites with monolithic implant crowns. The restorative material, LS2 versus PICN, does not impact patient satisfaction with their treatment. However, a long-term follow up is needed to draw more specific conclusions on patient satisfaction with the restorations.

来源:J Dent,查看原文。版权归原作者所有。

引用

  1. Kunavisarut C, Jarangkul W, Pornprasertsuk-Damrongsri S, et al. Patient-reported outcome measures (PROMs) comparing digital and conventional workflows for treatment with posterior single-unit implant restorations: A randomized controlled trial. J Dent. 2021. PMID: 34728252. doi:10.1016/j.jdent.2021.103875

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。