Fontan患者植入心室辅助装置后行双瓣置换一例
本文报告一例功能性单心室解剖患者在全腔静脉肺动脉连接术后远期因严重心功能障碍和Fontan衰竭植入Heartware心室辅助装置,1年后因主动脉瓣及房室瓣反流进展导致反复Fontan衰竭而需行双瓣置换。MITRIS二尖瓣的低剖面鞍形缝合环设计有助于在扩张程度较轻的心室中避免与Heartware流入道及房室瓣发生干扰。
要点
- 功能性单心室患者可植入Heartware心室辅助装置,但远期可能因瓣膜反流进展需再次手术
- MITRIS二尖瓣的低剖面鞍形缝合环设计可减少与心室辅助装置流入道的干扰
- Fontan衰竭患者心室辅助装置植入后需关注主动脉瓣和房室瓣反流的进展
核心结论
- 功能性单心室解剖患者植入Heartware心室辅助装置后,因主动脉瓣和房室瓣反流进展导致反复Fontan衰竭时,需行双瓣置换。
- MITRIS二尖瓣的低剖面鞍形缝合环设计有助于避免与Heartware流入道及房室瓣干扰。
研究设计与样本
- 个案报告:一例全腔静脉肺动脉连接术后远期发生Fontan衰竭的患者,植入Heartware心室辅助装置(Medtronic)后1年行双瓣置换。
主要发现
- 患者因严重心功能障碍和Fontan衰竭植入Heartware心室辅助装置。
- 术后1年因主动脉瓣和房室瓣反流进展导致反复Fontan衰竭,需行双瓣置换。
- 在扩张程度较轻的心室中,MITRIS二尖瓣的设计有利于避免与Heartware流入道和房室瓣的干扰。
临床怎么用
- 对功能性单心室Fontan患者植入心室辅助装置后,应监测主动脉瓣及房室瓣反流进展,必要时行双瓣置换。
- 在心室扩张程度较轻时,可考虑选用低剖面鞍形缝合环设计的二尖瓣假体以减少与心室辅助装置流入道的干扰。
局限性
- 为单个病例报告,经验外推需谨慎。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Few reports have described the implantation and management of an implantable ventricular assist device in patients with functional univentricular anatomy. We herein report a case of a patient who underwent Heartware ventricular assist device (Medtronic, Minneapolis, MN) implantation due to severe cardiac dysfunction and Fontan failure in the remote period after total cavopulmonary connection. Double valve replacement was subsequently required 1 year later due to repeated Fontan failure caused by the progression of aortic and atrioventricular regurgitation. The low-profile and saddle-shaped sewing cuff design of the MITRIS mitral valve (Edwards Lifesciences, Irvine, CA) were beneficial for avoiding the Heartware ventricular assist device inflow and atrioventricular valve interference in the less-dilated ventricle.
引用
- Fujita S, Oda S, Ono T, et al. Double Valve Replacement After Ventricular Assist Device Implantation in a Fontan Patient. Ann Thorac Surg. 2021. PMID: 34599908. doi:10.1016/j.athoracsur.2021.08.050
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。