文献速递瓣膜外科主动脉外科

早期重塑的同种移植肺动脉壁应力分析

Wall stresses of early remodeled pulmonary autografts.
PubMed 文献 · J Thorac Cardiovasc Surg · 2021-08-31

本研究通过患者特异性有限元模型分析Ross术后1年自体移植肺动脉的壁应力。纳入16例患者,结合双轴拉伸实验测量的材料属性和磁共振几何数据。结果显示收缩期第一主应力在窦管交界处最高(809 kPa),尤其使用Dacron加固时,为预测自体移植扩张奠定基础。

要点

  • 收缩期第一主应力在窦管交界处最高,为809 kPa。
  • Dacron加固修复动脉瘤时窦管交界处峰值应力更集中。
  • 患者特异性模型可用于预测自体移植远期扩张。

核心结论

  • 峰值第一主应力主要位于窦管交界处,尤其当使用Dacron加固时。
  • 患者特异性模拟为未来预测自体移植扩张奠定基础。

研究设计与样本

  • 招募接受Ross手术并收集术中肺动脉根部和主动脉标本的患者。
  • 基于1年随访的磁共振电影成像几何和患者特异性材料属性构建16例患者特异性有限元模型。
  • 纳入自体移植±Dacron修复动脉瘤和升主动脉几何,材料属性和壁厚通过双轴拉伸实验测量。
  • 采用乘法方法考虑体内磁共振成像的预应力几何,使用LS-DYNA软件加载至体循环压力(120/80)。

主要发现

  • 收缩期第一主应力在自体移植窦管交界处为809 kPa(25%-75%四分位距,691-1219 kPa)。
  • 收缩期第一主应力在窦部为567 kPa(485-675 kPa),在瓣环为637 kPa(555-755 kPa),在升主动脉为382 kPa(334-413 kPa)。
  • 收缩期第二主应力在窦管交界处为360 kPa(310-426 kPa),在窦部为355 kPa(320-394 kPa),在瓣环为272 kPa(252-319 kPa),在升主动脉为184 kPa(147-222 kPa)。
  • 自体移植平均直径在窦管交界处为29.9 ± 2.7 mm,在窦部为38.3 ± 5.3 mm,在瓣环为26.6 ± 4.0 mm。

临床怎么用

  • 临床可参考窦管交界处高应力区域,关注Dacron加固对应力分布的影响。
  • 患者特异性模拟有望用于预测Ross术后自体移植的远期扩张。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: The Ross procedure is an excellent option for children or young adults who need aortic valve replacement because it can restore survival to that of the normal aged-matched population. However, autograft remodeling can lead to aneurysmal formation and reoperation, and the biomechanics of this process is unknown. This study investigated postoperative autograft remodeling after the Ross procedure by examining patient-specific autograft wall stresses. METHODS: Patients who have undergone the Ross procedure who had intraoperative pulmonary root and aortic specimens collected were recruited. Patient-specific models (n = 16) were developed using patient-specific material property and their corresponding geometry from cine magnetic resonance imaging at 1-year follow-up. Autograft ± Dacron for aneurysm repair and ascending aortic geometries were reconstructed to develop patient-specific finite element models, which incorporated material properties and wall thickness experimentally measured from biaxial stretching. A multiplicative approach was used to account for prestress geometry from in vivo magnetic resonance imaging. Pressure loading to systemic pressure (120/80) was performed using LS-DYNA software (LSTC Inc, Livermore, Calif). RESULTS: At systole, first principal stresses were 809 kPa (25%-75% interquartile range, 691-1219 kPa), 567 kPa (485-675 kPa), 637 kPa (555-755 kPa), and 382 kPa (334-413 kPa) at the autograft sinotubular junction, sinuses, annulus, and ascending aorta, respectively. Second principal stresses were 360 kPa (310-426 kPa), 355 kPa (320-394 kPa), 272 kPa (252-319 kPa), and 184 kPa (147-222 kPa) at the autograft sinotubular junction, sinuses, annulus, and ascending aorta, respectively. Mean autograft diameters were 29.9 ± 2.7 mm, 38.3 ± 5.3 mm, and 26.6 ± 4.0 mm at the sinotubular junction, sinuses, and annulus, respectively. CONCLUSIONS: Peak first principal stresses were mainly located at the sinotubular junction, particularly when Dacron reinforcement was used. Patient-specific simulations lay the foundation for predicting autograft dilatation in the future after understanding biomechanical behavior during long-term follow-up.

来源:J Thorac Cardiovasc Surg,查看原文。版权归原作者所有。

引用

  1. Xuan Y, Alonso E, Emmott A, et al. Wall stresses of early remodeled pulmonary autografts. J Thorac Cardiovasc Surg. 2021. PMID: 34538420. doi:10.1016/j.jtcvs.2021.08.058

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。