马凡综合征升主动脉瘤的患者特异性生物力学研究
结果显示峰值壁应力在窦部最高,且直径与壁应力相关性差,提示基于直径的手术标准可能遗漏高壁应力的小动脉瘤患者。
要点
- 马凡综合征患者窦部峰值壁应力高于窦管交界和升主动脉。
- 主动脉直径与壁应力相关性差,5cm cutoff下壁应力显著重叠。
- 患者特异性模型可能识别高壁应力小动脉瘤,考虑早期手术。
核心结论
- 马凡综合征窦部-胸主动脉瘤峰值壁应力在窦部最高,其次窦管交界,升主动脉最低。
- 直径与峰值应力相关性差,当前5cm手术标准下小于5cm与大于等于5cm患者壁应力显著重叠。
- 患者特异性马凡动脉瘤模型可能识别高壁应力的小动脉瘤患者,可能受益于早期手术修复以预防夹层。
研究设计与样本
- 进行有限元分析以确定收缩期窦部、窦管交界和升主动脉的壁应力分布。
主要发现
- 峰值周向应力在窦部为432.8 ± 111 kPa,窦管交界为408.1 ± 88.3 kPa,升主动脉为321.9 ± 83.8 kPa;窦部与升主动脉差异显著(P < 3.08E-07),窦管交界与升主动脉差异显著(P < 2.26E-06)。
- 峰值纵向壁应力在窦部为352 ± 73.9 kPa,窦管交界为277.5 ± 89.5 kPa,升主动脉为200.6 ± 81 kPa;窦部与窦管交界差异显著(P < 6.01E-06),窦部与升主动脉差异显著(P < 9.79E-13),窦管交界与升主动脉差异显著(P < 3.34E-07)。
- 直径与壁应力无相关性;动脉瘤<5 cm与≥5 cm以及<4.5 cm与≥4.5 cm比较,周向或纵向壁应力均无显著差异。
临床怎么用
- 对于马凡综合征窦部-胸主动脉瘤患者,除直径外可考虑生物力学评估壁应力。
- 高壁应力的小动脉瘤患者可能受益于早期手术修复以预防夹层。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Guidelines for sinus of Valsalva (SOV)-thoracic aortic aneurysms in Marfan syndrome recommend size-based criteria for elective surgical repair. Biomechanics may provide a better prediction of dissection risk than diameter. Our aim was to determine magnitudes of wall stress in the aortic root of Marfan patients using finite element analyses. METHODS: Forty-six Marfan patients underwent patient-specific 3-dimensional SOV-thoracic aortic aneurysm geometry reconstruction using imaging data. Finite element analyses were performed to determine wall stress distributions at SOV, sinotubular junction (STJ), and ascending aorta (AscAo) at systole. RESULTS: Peak circumferential stresses were 432.8 ± 111 kPa, 408.1 ± 88.3 kPa, and 321.9 ± 83.8 kPa at the SOV, STJ, and AscAo, respectively, with significant differences between SOV and AscAo (P < 3.08E-07), and STJ and AscAo (P < 2.26E-06). Peak longitudinal wall stresses were 352 ± 73.9 kPa, 277.5 ± 89.5 kPa, and 200.6 ± 81 kPa at SOV, STJ, and AscAo, respectively, with significant differences between SOV and STJ (P < 6.01E-06), SOV and AscAo (P < 9.79E-13), and STJ and AscAo (P < 3.34E-07). Diameter was not correlated to wall stresses. Comparison of wall stresses in aneurysm <5 cm vs ≥5 cm and <4.5 cm vs ≥4.5 cm showed no significant differences in wall stresses in the circumferential or longitudinal direction. CONCLUSIONS: Peak wall stresses in Marfan SOV- thoracic aortic aneurysm were greatest in SOV than STJ than AscAo. Diameter was poorly correlated to peak stresses such that current guidelines with 5 cm cutoff had significant overlap in peak stresses in patients with <5 cm vs ≥5 cm. Use of patient-specific Marfan aneurysm models may identify patients with high wall stresses and small aneurysms who could benefit from earlier surgical repair to prevent aortic dissection.
引用
- Xuan Y, D'Souza SN, Wang Z, et al. Patient-Specific Biomechanics in Marfan Ascending Thoracic Aortic Aneurysms. Ann Thorac Surg. 2021. PMID: 34416226. doi:10.1016/j.athoracsur.2021.07.042
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。