优化利用Valsalva移植物裙边完成Bentall手术
本文报告一例主动脉根部动脉瘤患者,既往已行主动脉瓣置换术并置入大型机械瓣,再次手术时机械瓣功能正常。作者描述了一种保留现有主动脉瓣的主动脉根部替换技术,类似完成性Bentall手术,使用32-mm Valsalva移植物,将移植物的裙边部分缝合至机械瓣的缝合环。裙边能够增加其直径是该技术的关键。
要点
- 保留功能正常的机械瓣,避免再次瓣膜置换。
- 利用Valsalva移植物裙边的可扩张性缝合至机械瓣缝合环。
- 该技术适用于既往主动脉瓣置换后发生主动脉根部动脉瘤的患者。
核心结论
- 对于既往主动脉瓣置换且机械瓣功能正常的主动脉根部动脉瘤患者,可采用保留瓣膜的完成性Bentall技术,利用Valsalva移植物裙边缝合至机械瓣缝合环。
研究设计与样本
- 本文为个案报告,描述一例主动脉根部动脉瘤患者再次手术的技术。
主要发现
- 使用32-mm Valsalva移植物,将其裙边部分缝合至机械瓣缝合环,成功完成主动脉根部替换并保留原有机械瓣。
关键数值与推荐
- 裙边增加直径的能力是该技术的关键。
临床怎么用
- 对于既往主动脉瓣置换后出现主动脉根部动脉瘤且机械瓣功能正常的患者,可考虑采用此技术保留瓣膜。
局限性
- 个案报告,缺乏长期随访和大样本验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
This report discusses the case of a patient with an aortic root aneurysm who had previously undergone aortic valve replacement with a large mechanical prosthesis that proved to be normally functioning at the time of reoperation. This report describes a technique of replacing the aortic root while retaining the existing aortic valve, similar to the completion Bentall procedure, using a 32-mm Valsalva graft by suturing the skirted portion of the graft to the sewing ring of the mechanical valve. The ability of the skirt to increase its diameter is the key to this approach.
引用
- Scaffa R, Salica A, Weltert L, et al. Optimized Use of the "Skirt" of the Valsalva Graft for the Completion Bentall Procedure. Ann Thorac Surg. 2021. PMID: 33689742. doi:10.1016/j.athoracsur.2021.02.055
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。