基于人体测量的多变量模型预测患者校正的主动脉风险形态
本研究基于510例对照者的CT血管造影和临床数据,开发并验证了基于年龄、性别和体表面积的多变量线性回归模型,用于预测升主动脉直径和长度的患者校正阈值。该模型在回顾性数据中识别有夹层风险主动脉的效果优于传统55 mm直径阈值,并已提供在线计算器。
要点
- 年龄、性别和体表面积是升主动脉直径(R²=0.40)和长度(R²=0.26)的预测因素。
- 对照组升主动脉平均直径为33.8 mm(SD±5.2),长度为91.9 mm(SD±12.2)。
- 模型识别夹层风险主动脉优于传统55 mm阈值,在线计算器可用。
核心结论
- 回归模型可提供升主动脉直径和长度的患者校正预测阈值,在回顾性数据中识别夹层风险主动脉优于传统55 mm直径阈值。
研究设计与样本
- 研究分析了510例对照者的CT血管造影和临床数据,并纳入143例模型验证者、125例升主动脉扩张(45-54 mm)患者、58例动脉瘤(≥55 mm)患者、206例A型主动脉夹层患者和19例在发生A型主动脉夹层前≤2年内接受过CT血管造影的患者。
主要发现
- 对照组升主动脉平均直径为33.8 mm(SD±5.2 mm),从主动脉瓣到头臂干长度為91.9 mm(SD±12.2 mm),两者均与人体测量参数相关且小于所有病理组(P < 0.001)。
- 对照组多变量线性回归显示年龄、性别和体表面积是升主动脉直径(R²=0.40)和长度(R²=0.26)的预测因素。
- 主动脉瓣二瓣化未纳入模型,其在对照组患病率仅3.2%,在扩张和动脉瘤组>25%。
关键数值与推荐
- 传统55 mm直径阈值用于识别夹层风险主动脉,模型在回顾性数据中表现更优。
临床怎么用
- 临床可使用在线计算器(www.aorticcalculator.com)基于年龄、性别和体表面积获取患者校正的主动脉直径和长度阈值,辅助识别夹层风险。
局限性
- 研究为回顾性数据,模型验证样本量有限,主动脉瓣二瓣化未纳入模型。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: Preventing type A aortic dissection requires reliable prediction. We developed and validated a multivariable prediction model based on anthropometry to define patient-adjusted thresholds for aortic diameter and length. METHODS: We analysed computed tomography angiographies and clinical data from 510 control patients, 143 subjects for model validation, 125 individuals with ascending aorta ectasia (45-54 mm), 58 patients with aneurysm (≥55 mm), 206 patients with type A aortic dissection and 19 patients who had received a computed tomography angiography ≤2 years before they suffered from a type A aortic dissection. Computed tomography angiographies were analysed using curved planar reformations. RESULTS: In the control group, the mean ascending aortic diameter was 33.8 mm [standard deviation (SD) ±5.2 mm], and the length, measured from the aortic valve to the brachiocephalic trunk, was 91.9 mm (SD ±12.2 mm); both diameter and length were correlated with anthropometric parameters and were smaller than the respective values in all pathological groups (P < 0.001). Multivariable linear regression analysis of the control group revealed that age, sex and body surface area were predictors of ascending aorta diameter (R2 = 0.40) and length (R2 = 0.26). Bicuspidity of the aortic valve was not included in the model; its prevalence was only 3.2% in the control group but >25% in the ectasia and aneurysm groups. CONCLUSIONS: The regression model provides a patient-adjusted prediction of the thresholds for aortic diameter and length. In our retrospective data, the model resulted in better identification of aortas at the risk of dissection than the conventional 55-mm diameter threshold. The model is available as an Internet calculator (www.aorticcalculator.com).
引用
- Krüger T, Boburg RS, Hamdoun H, et al. Development of a multivariable prediction model for patient-adjusted aortic risk morphology. Eur J Cardiothorac Surg. 2020. PMID: 32359061. doi:10.1093/ejcts/ezaa131
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。