文献速递心外重症与机械循环支持主动脉外科

螺旋流机械辅助下的主动脉血流动力学研究

Aortic Hemodynamics of Spiral-Flow-Generated Mechanical Assistance.
PubMed 文献 · Ann Thorac Surg · 2019-09-23

本研究通过计算流体动力学模拟,探讨在机械循环支持装置流出道人工血管生成螺旋流对主动脉血流场的影响,包括低速区、内皮壁面剪切应力(WSS)区域及再循环区。结果显示增加螺旋流含量可减少低速区、低WSS区域并增加高WSS区域,且流出道吻合角度是主动脉根部冲刷和射流壁面冲击的关键决定因素。顺时针/逆时针螺旋流效果受移植物位置影响,但总体上更贴合主动脉三维曲率的螺旋流形式有望减轻动脉粥样硬化形成。

要点

  • 增加螺旋流含量可减少低速区(<5 cm/s)和低WSS区域(<3 dyn/cm2),同时增加高WSS区域(>80 dyn/cm2)。
  • 流出道吻合角度是主动脉根部冲刷和流体射流壁面冲击的关键决定因素。
  • 逆时针螺旋流在减少再循环/停滞区方面优于直射流/顺时针流,但上向和后向移植物位置存在例外。

核心结论

  • 更贴合主动脉三维曲率和移植物角度位置的螺旋流形式有望减轻动脉粥样硬化形成,预防血管重塑并减少机械辅助循环中的斑块形成/侵蚀。

研究设计与样本

  • 采用三维模型进行计算流体动力学模拟,模型为流出道人工血管与影像来源主动脉弓行端侧虚拟吻合。
  • 研究评估螺旋流调制(顺时针/逆时针螺旋流含量)和流出道吻合角度(下向/上向、前向/后向)对流速、低/高WSS及流线的影响。

主要发现

  • 增加螺旋流含量减少了低速区(<5 cm/s)和低WSS区域(<3 dyn/cm2),并同时增加了高WSS区域(>80 dyn/cm2)。
  • 流出道吻合角度是主动脉根部冲刷和流体射流壁面冲击的关键决定因素。
  • 与直射流/顺时针流相比,逆时针螺旋流在减少再循环/停滞区方面占优势,但上向和后向移植物位置存在例外。

关键数值与推荐

  • 低速区定义为流速<5 cm/s,低WSS定义为<3 dyn/cm2,高WSS定义为>80 dyn/cm2。

临床怎么用

  • 在机械循环支持装置流出道设计中可考虑生成与主动脉三维曲率及移植物角度相匹配的螺旋流,以优化主动脉血流动力学。

局限性

  • 研究基于计算流体动力学模拟,未在体内或临床环境中验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Mechanical circulatory support devices are being increasingly used as destination therapy in end-stage heart failure patients. Although current devices have significantly improved survival rates, the resulting hemodynamics remains nonphysiological. Spiral forms of blood flow are known to exist in the large arteries (eg, aorta) and serve as a biomimetic-motivation for generating these physiologically adapted flow regimes. We aimed to study the potential benefits of generating spiral flow at the mechanical circulatory support outflow graft and the resultant flow-fields in the aorta, including recirculation zones and endothelial wall shear stress (WSS) areas. METHODS: A three-dimensional model of an outflow graft virtually anastomosed end-to-side to an image-derived aortic arch was used in computational fluid dynamic simulations. To study the impact of both spiral flow modulation (clockwise/counterclockwise helical-flow content) and the outflow graft anastomosis angle (inferiorly/superiorly directed, anteriorly/posteriorly directed), flow velocities were measured, low/high WSS were computed, and fluid streamlines were visualized. RESULTS: Increased helical-flow content reduced regions of low velocity (<5 cm/s), minimized areas exhibiting low WSS (<3 dyn/cm2), and concomitantly increased areas of high WSS (>80 dyn/cm2). The outflow graft anastomosis angle was a key determinant of aortic root washout and fluid-jet wall impingement. Despite counterclockwise spiral flow predominance in diminishing the size of recirculation/stasis zones compared to straight/clockwise flow, exceptions to this were noted with the superiorly directed and posteriorly directed graft placements. CONCLUSIONS: Spiral flow-forms better tailored to the underlying three-dimensional aortic curvature and graft angle positioning is expected to help attenuate atherogenesis, preventing vascular remodeling and minimizing plaque formation/erosion in mechanically assisted circulation.

来源:Ann Thorac Surg,查看原文。版权归原作者所有。

引用

  1. Huang Zhang P, Tkatch C, Vainchtein D, et al. Aortic Hemodynamics of Spiral-Flow-Generated Mechanical Assistance. Ann Thorac Surg. 2019. PMID: 31557478. doi:10.1016/j.athoracsur.2019.08.028

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。