文献速递心外重症与机械循环支持

计算HeartMate II左心室辅助装置流入插管与装置主体三维角的新公式

Novel Formula to Calculate Three-Dimensional Angle Between Inflow Cannula and Device Body of HeartMate II LVAD.
PubMed 文献 · Ann Thorac Surg · 2019-06-27

该研究回顾性纳入2008至2016年间275例接受HeartMate II左心室辅助装置植入的患者,推导出基于胸部X线二维测量计算流入插管与装置主体实际三维角度的公式。在28例有三维CT的患者中,公式计算的三维角度与CT实测三维角度无显著差异(71.7°±13.4° vs 71.1°±11.5°,P=.858)。全部患者中公式计算的三维角度为74.4°±14.2°,显著大于二维投影角度65.2°±11.3°(P<.001)。

要点

  • 基于胸部X线二维测量可计算HeartMate II流入插管与装置主体的三维角度。
  • 公式计算的三维角度与CT实测三维角度无显著差异。
  • 公式计算的三维角度显著大于二维投影角度。

核心结论

  • 建立了一种通过数学公式计算HeartMate II流入插管与装置主体实际三维角度的新方法。

研究设计与样本

  • 回顾性队列研究,纳入2008至2016年接受HeartMate II左心室辅助装置植入的连续275例患者,中位年龄60岁(25%四分位51岁,75%四分位68岁)。

主要发现

  • 在28例有三维CT的子组中,公式计算的三维角度与CT实测三维角度无显著差异(71.7°±13.4° vs 71.1°±11.5°,P=.858)。
  • 全部患者中,公式计算的三维角度为74.4°±14.2°,显著大于二维投影角度65.2°±11.3°(P<.001)。
  • 公式计算的三维角度在有无装置血栓、出血性卒中、缺血性卒中或死亡的患者间均无统计学差异(P均>.05)。

临床怎么用

  • 该公式可用于研究者验证胸部X线二维投影角度与装置血栓关系的研究发现。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The acute angle between inflow cannula and device body of HeartMate II left ventricular assist device (LVAD) (Abbott, Pleasanton, California) is associated with device thrombosis. However, most studies utilized two-dimensional (2D) angle obtained from chest roentgenogram (CXR), which is unlikely accurate. We aimed to create and validate a formula to estimate actual three-dimensional (3D) angle. METHODS: We retrospectively reviewed the cohort undergoing HeartMate II LVAD implantation between 2008 and 2016. A formula for calculating 3D angles of the LVAD inflow cannula relative to the device body was mathematically derived, using simple 2D measurements from CXR. RESULTS: The cohort included consecutive 275 patients with HeartMate II (median age: 60 [25% quartile: 51, 75% quartile: 68] years). There was no significant difference between the calculated 3D angles (from formula) and actual 3D angles (from computed tomography) from the subset group with 3D computed tomography (n = 28) (71.7° ± 13.4° vs 71.1° ± 11.5°, P = .858). Among all participants, the calculated 3D angle (from formula) was 74.4° ± 14.2°, which was significantly larger than the 2D projected angle (from CXR) (65.2° ± 11.3°, P < .001). There was no statistical difference in the calculated 3D angles (from formula) between patients with/without device thrombosis, hemorrhagic stroke, ischemic stroke, or mortality (P > .05 for all). CONCLUSIONS: We established a novel formula to mathematically calculate actual 3D angles between inflow cannula and device body of HeartMate II. The formula would help investigators to validate their findings of the relationship between 2D projected angle (from CXR) and device thrombosis.

来源:Ann Thorac Surg,查看原文。版权归原作者所有。

引用

  1. Tsushima Y, Imamura T, Landeras L, et al. Novel Formula to Calculate Three-Dimensional Angle Between Inflow Cannula and Device Body of HeartMate II LVAD. Ann Thorac Surg. 2019. PMID: 31255615. doi:10.1016/j.athoracsur.2019.04.124

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。