食管生物力学再探讨:猪模型中缝合张力、吻合方式与针距的关系
该研究在猪离体食管上比较天然食管与连续缝合、间断缝合、吻合器及倒刺线吻合的断裂强度,并分析缝合针距和持续牵引时相的影响。结果显示仅简单连续缝合的断裂强度与天然食管相当(Δ=-5.25牛顿,95%CI -10.69至0.19,p=0.058),且优于其他吻合方式(Δ≥14.01牛顿,p≤0.02)。断裂强度与缝合针距相关(R=0.905),递增持续牵引可提高断裂强度(Δ=13.36牛顿,95%CI 9.93至16.79,p<0.0001)。
要点
- 简单连续缝合的断裂强度最接近天然食管,优于间断、吻合器及倒刺线吻合。
- 断裂强度与缝合针距长度相关(R=0.905),但该预测关系仅见于简单缝线。
- 递增持续牵引可提高断裂强度和长度增益,或与长段食管闭锁修复相关。
核心结论
- 仅简单连续缝合吻合达到天然食管的线性断裂强度,其他吻合方式均较低。
- 递增持续牵引可提高食管残余段的断裂强度和长度增益。
研究设计与样本
- 离体猪食管研究,使用电动水平测试台施加线性牵引。
- 比较天然食管与简单连续、简单间断、吻合器及倒刺线吻合的断裂强度,每组n=5,检验效能至少80%。
主要发现
- 连续缝合吻合断裂强度与天然食管相当(Δ=-5.25牛顿,95%CI -10.69至0.19,p=0.058)。
- 连续缝合吻合优于其他所有吻合方式(Δ≥14.01牛顿,p≤0.02)。
- 断裂强度与缝合针距长度相关(R=0.905),对简单缝线预测模型调整R2=0.812,p<0.0001。
- 递增持续牵引较对照提高断裂强度(Δ=13.36牛顿,95%CI 9.93至16.79,p<0.0001)和长度增益(Δ=1.06 cm,95%CI 0.65至1.48,p<0.0001)。
临床怎么用
- 食管吻合时可优先考虑简单连续缝合以更接近天然食管的抗牵引强度。
- 长段食管闭锁修复中递增持续牵引可能有助于增加长度和抗牵引力。
- 缝合针距长度可能影响简单缝线的断裂强度,需在操作中关注。
局限性
- 研究为离体猪食管实验,结果需在活体动物中验证。
- 吻合口漏为多因素过程,离体断裂强度不能完全代表临床结局。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Anastomotic tension has repeatedly been associated with anastomotic leakages after esophagectomy for cancer or esophageal atresia repair. We therefore aimed to determine which anastomotic technique would come as close as possible to the native esophagus in sustaining traction forces. Constant traction for several minutes at esophageal remnants and large suture bites are also considered relevant in long-gap esophageal atresia repair. METHODS: Porcine esophagi were subjected to linear traction using a motorized horizontal test stand. We compared breaking strengths of native esophagi to simple continuous, simple interrupted, stapled, and barbed suture anastomoses. We also investigated the effects of suture bite length and phases of constant traction on breaking strengths and powered all experiments to at least 80% using exploratory investigations (n = 5 per group). RESULTS: Continuous suture anastomoses had a breaking strength comparable to native esophagi (Δ = -5.25 Newton, 95% confidence interval: -10.69 to 0.19 Newton, p = 0.058) and outperformed all other investigated anastomoses (Δ ≥14.01 Newton, p ≤ 0.02). Breaking strength correlated with suture bite length (R = 0.905) and predicted breaking strength for the simple stitch (adjusted R2 = 0.812, p < 0.0001), but not for anastomoses. Phases of incrementally increasing constant traction resulted in higher breaking strengths (Δ = 13.36 Newton, 95% confidence interval: 9.93 to 16.79 Newton, p < 0.0001) and higher length gain (Δ = 1.06 cm, 95% confidence interval: 0.65 to 1.48 cm, p < 0.0001) compared with controls. CONCLUSIONS: Only simple continuous anastomoses achieved the linear breaking strength of native tissue. Our study provides important insights in tolerance to traction forces, but its results have to be corroborated in living animals as anastomotic leakages are multifactorial processes.
引用
- Oetzmann von Sochaczewski C, Tagkalos E, Lindner A, et al. Esophageal Biomechanics Revisited: A Tale of Tenacity, Anastomoses, and Suture Bite Lengths in Swine. Ann Thorac Surg. 2019. PMID: 30629926. doi:10.1016/j.athoracsur.2018.12.009
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。