夹层前影像揭示A型主动脉夹层患者纵向壁应力与僵硬度增加
该研究回顾351例A型主动脉夹层手术患者,筛选出7例有夹层前≥1年影像者,对比年龄和尺寸匹配的非夹层非动脉瘤对照。夹层前超声显示主动脉壁应变和扩张性降低、僵硬度及纵向壁应力升高,且纵向壁应力升高区域与内膜破口位置重叠。提示影像衍生的生物力学指标可能有助于夹层预测模型。
要点
- 夹层前主动脉壁应变和扩张性降低、僵硬度增加
- 夹层前纵向壁应力升高,而环向壁应力无显著差异
- 纵向壁应力升高区域与内膜破口位置存在重叠
核心结论
- 夹层前影像可识别A型主动脉夹层患者升主动脉僵硬度增加和纵向壁应力升高。
研究设计与样本
- 回顾性研究,从351例A型主动脉夹层手术患者中筛选7例有夹层前≥1年CT血管造影和超声心动图者,与年龄和尺寸匹配的非夹层非动脉瘤对照比较。
主要发现
- 夹层前超声显示主动脉壁应变降低(14.50 ± 1.13% vs 8.49 ± 1.08%;P < .01)。
- 夹层前超声显示扩张性降低(4.26 ± 0.44 vs 2.39 ± 0.33 10-6 cm2·dyne-1;P < .01)。
- 夹层前超声显示僵硬度增加(3.84 ± 0.24 vs 7.48 ± 1.05;P < .001)。
- 夹层前超声显示纵向壁应力升高(246 ± 22 vs 172 ± 37 kPa;P < .01),环向壁应力无显著差异。
- 夹层前CT血管造影模型显示纵向壁应力升高区域与内膜破口位置重叠。
临床怎么用
- 对具有夹层前影像的患者,可关注主动脉壁应变、扩张性、僵硬度及纵向壁应力等生物力学指标。
- 影像衍生的患者特异性生物力学属性图可能有助于改进主动脉夹层预测模型的设计。
局限性
- 样本量小(7例夹层患者),为回顾性研究。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: To assess ascending aortic distensibility and build geometry and distensibility-based patient-specific stress distribution maps in patients sustaining type A aortic dissection (TAAD) using predissection noninvasive imaging. METHODS: Review of charts from patients undergoing surgical repair of TAAD (n = 351) led to the selection of a subset population (n = 7) with 2 or more predissection computed tomography angiography scans and echocardiograms at least 1 year before dissection. Ascending aortic wall biomechanical properties (aortic strain, distensibility, and stiffness) were compared with age- and size-matched nondissected nonaneurysmal controls. Patient-specific aortic strain served as an input in aortic geometry-based simulated 3-dimensional reconstructions to generate longitudinal and circumferential wall stress maps. Inspection of perioperative dissection scans and intraoperative visual examination confirmed primary tear locations. RESULTS: Predissection echocardiography revealed ascending aortas of patients sustaining TAAD to exhibit decreased aortic wall strain (14.50 ± 1.13% vs 8.49 ± 1.08%; P < .01), decreased distensibility (4.26 ± 0.44 vs 2.39 ± 0.33 10-6 cm2·dyne-1; P < .01), increased stiffness (3.84 ± 0.24 vs 7.48 ± 1.05; P < .001), and increased longitudinal wall stress (246 ± 22 vs 172 ± 37 kPa; P < .01). There was no significant difference in circumferential wall stress. Predissection computed tomography angiography models revealed overlap between regions of increased longitudinal wall stress and primary tear sites. CONCLUSIONS: Using predissection imaging, we identified increased stiffness and longitudinal wall stress in ascending aortas of patients with dissection. Patient-specific imaging-derived biomechanical property maps like these may be instrumental toward designing better prediction models of aortic dissection potential.
引用
- Emerel L, Thunes J, Kickliter T, et al. Predissection-derived geometric and distensibility indices reveal increased peak longitudinal stress and stiffness in patients sustaining acute type A aortic dissection: Implications for predicting dissection. J Thorac Cardiovasc Surg. 2018. PMID: 30551966. doi:10.1016/j.jtcvs.2018.10.116
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。