自动化钛紧固件与手工打结在胸骨切开术中的随机对照试验
这项随机对照试验将50例择期行二尖瓣或三尖瓣或两者环缩术的患者分为手工打结组和自动化钛紧固件组各25例,比较固定环缩装置所需时间。自动化紧固件缩短了瓣环固定时间(二尖瓣每针22±2秒 vs 12±1.1秒,P<0.0001),但对主动脉阻断时间和体外循环时间无显著影响,且总成本显著更高(1190±374美元 vs 164±60美元,P<0.0001)。
要点
- 自动化钛紧固件缩短二尖瓣环固定时间(每针22±2秒 vs 12±1.1秒,P<0.0001)。
- 三尖瓣环固定时间亦缩短(每针20±2.1秒 vs 13±2秒,P=0.0004)。
- 自动化紧固件对主动脉阻断时间和体外循环时间无显著影响。
核心结论
- 使用自动化紧固件辅助胸骨切开途径的瓣环固定可小幅节省手术时间(平均每针10秒),但对体外循环或主动脉阻断时间无总体影响,且每例手术平均增加成本1026美元。
研究设计与样本
- 随机对照试验,纳入50例由单一外科医生行初次二尖瓣或三尖瓣或两者环缩术为基础瓣膜修复的患者,随机分为手工打结组和自动化钛紧固件组各25例。
主要发现
- 二尖瓣环缩带或环固定时间:手工打结组6.1±0.9分钟 vs 自动化紧固件组3.1±0.4分钟(P<0.0001);按每针计算分别为22±2秒 vs 12±1.1秒(P<0.0001)。
- 三尖瓣环缩固定时间:手工打结组4.2±1.2分钟 vs 自动化紧固件组2.2±0.3分钟(P=0.0005);按每针计算分别为20±2.1秒 vs 13±2秒(P=0.0004)。
- 自动化紧固件的使用对主动脉阻断时间或体外循环持续时间无显著影响。
- 自动化钛紧固件固定瓣环的总成本(装置成本加手术室时间成本)显著高于手工打结(1190±374美元 vs 164±60美元;P<0.0001)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: The relative benefits of automated titanium fasteners (LSI Solutions, Victor, NY) have not been examined in patients undergoing sternotomy. The aim of this study was to assess the time and cost required for suture fixation with the automated device versus conventional hand tying in sternotomy for mitral or tricuspid ring annuloplasty. METHODS: Fifty patients scheduled to undergo primary mitral or tricuspid, or both, ring annuloplasty-based valve repair operation by a single surgeon were randomly assigned to receive either conventional hand-tied knots or automated titanium fasteners, with 25 patients in each group. The primary outcome variable was the time required to affix the annuloplasty device to the valve annulus. RESULTS: The times taken to affix a mitral annuloplasty band or ring were 6.1 ± 0.9 min for manual tying versus 3.1 ± 0.4 min for automated fasteners (p < 0.0001); when calculated per annuloplasty stitch, the values were 22 ± 2 s versus 12 ± 1.1 s, respectively (p < 0.0001). The corresponding values for tricuspid annuloplasty were 4.2 ± 1.2 min (hand tying) versus 2.2 ± 0.3 min (automated fasteners) (p = 0.0005), and the times for each suture were 20 ± 2.1 s versus 13 ± 2 s, respectively (p = 0.0004). The use of the automated fastener had no significant impact on aortic cross-clamp time or cardiopulmonary bypass duration. Total cost associated with annuloplasty fixation with automated titanium fasteners (device cost in addition to operating room time cost) was significantly higher than with hand tying ($1,190 ± 374 vs $164 ± 60; p < 0.0001). CONCLUSIONS: Using the automated fastener to facilitate annuloplasty fixation through a sternotomy resulted in a small procedural time savings (average of 10 s/stitch) that had no overall impact on cardiopulmonary bypass or cross-clamp times but added an average cost of $1,026 to the operation.
引用
- Etiwy M, Javadikasgari H, Houghtaling P, et al. Automated Titanium Fasteners Versus Hand-Tied Knots: A Randomized Controlled Trial. Ann Thorac Surg. 2018. PMID: 29883653. doi:10.1016/j.athoracsur.2018.05.022
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。