文献速递主动脉外科瓣膜外科

二叶式主动脉瓣与三叶式主动脉瓣升主动脉瘤的壁应力比较

Wall stress on ascending thoracic aortic aneurysms with bicuspid compared with tricuspid aortic valve.
PubMed 文献 · J Thorac Cardiovasc Surg · 2018-03-08

研究对二叶式主动脉瓣(17例)和三叶式主动脉瓣(19例)升主动脉瘤(>4.5 cm)患者行心电门控CT血管造影,重建个体化三维几何并加载至体循环压力,用有限元分析计算壁应力。二叶式主动脉瓣升主动脉瘤的纵向和环向应力均高于三叶式主动脉瓣升主动脉瘤,且在窦管交界处更明显;峰值壁应力与二叶式主动脉瓣升主动脉瘤直径不相关。

要点

  • 二叶式主动脉瓣升主动脉瘤纵向第99百分位应力为280 kPa,高于三叶式主动脉瓣升主动脉瘤的242 kPa(P = .028)。
  • 二叶式主动脉瓣升主动脉瘤窦管交界处纵向应力为405 kPa,高于三叶式主动脉瓣升主动脉瘤的329 kPa(P = .023)。
  • 二叶式主动脉瓣升主动脉瘤环向第99百分位应力为548 kPa,高于三叶式主动脉瓣升主动脉瘤的462 kPa(P = .033)。

核心结论

  • 二叶式主动脉瓣升主动脉瘤的环向和纵向应力均高于三叶式主动脉瓣升主动脉瘤,且在窦管交界处更明显。
  • 峰值壁应力与二叶式主动脉瓣升主动脉瘤直径不相关,提示仅凭直径可能难以预测该人群的夹层风险。
  • 研究结果强调需要个体化动脉瘤壁应力分析以准确预测夹层风险。

研究设计与样本

  • 研究纳入二叶式主动脉瓣升主动脉瘤17例和三叶式主动脉瓣升主动脉瘤19例,动脉瘤直径均大于4.5 cm,行心电门控CT血管造影。
  • 重建患者个体化三维几何,在考虑预应力几何后加载至体循环压力,使用LS-DYNA求解器(LSTC Inc,Livermore,Calif)及用户自定义纤维嵌入材料模型进行有限元分析,计算升主动脉瘤壁应力。

主要发现

  • 收缩期二叶式主动脉瓣升主动脉瘤纵向第99百分位应力为280 kPa,三叶式主动脉瓣升主动脉瘤为242 kPa(P = .028)。
  • 二叶式主动脉瓣升主动脉瘤纵向应力与直径不相关(r = -0.004),三叶式主动脉瓣升主动脉瘤纵向应力与直径相关性较好(r = 0.677)。
  • 窦管交界处纵向应力二叶式主动脉瓣升主动脉瘤为405 kPa,高于三叶式主动脉瓣升主动脉瘤的329 kPa(P = .023)。
  • 二叶式主动脉瓣升主动脉瘤环向第99百分位应力为548 kPa,三叶式主动脉瓣升主动脉瘤为462 kPa(P = .033),且与二叶式主动脉瓣升主动脉瘤直径不相关(r = 0.007)。

临床怎么用

  • 原文结论指出,峰值壁应力与二叶式主动脉瓣升主动脉瘤直径不相关,提示仅凭直径可能难以预测该人群的夹层风险。
  • 原文结论强调需要个体化动脉瘤壁应力分析以准确预测夹层风险。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Guidelines for repair of bicuspid aortic valve-associated ascending thoracic aortic aneurysms have been changing, most recently to the same criteria as tricuspid aortic valve-ascending thoracic aortic aneurysms. Rupture/dissection occurs when wall stress exceeds wall strength. Recent studies suggest similar strength of bicuspid aortic valve versus tricuspid aortic valve-ascending thoracic aortic aneurysms; thus, comparative wall stress may better predict dissection in bicuspid aortic valve versus tricuspid aortic valve-ascending thoracic aortic aneurysms. Our aim was to determine whether bicuspid aortic valve-ascending thoracic aortic aneurysms had higher wall stresses than their tricuspid aortic valve counterparts. METHODS: Patients with bicuspid aortic valve- and tricuspid aortic valve-ascending thoracic aortic aneurysms (bicuspid aortic valve = 17, tricuspid aortic valve = 19) greater than 4.5 cm underwent electrocardiogram-gated computed tomography angiography. Patient-specific 3-dimensional geometry was reconstructed and loaded to systemic pressure after accounting for prestress geometry. Finite element analyses were performed using the LS-DYNA solver (LSTC Inc, Livermore, Calif) with user-defined fiber-embedded material model to determine ascending thoracic aortic aneurysm wall stress. RESULTS: Bicuspid aortic valve-ascending thoracic aortic aneurysms 99th-percentile longitudinal stresses were 280 kPa versus 242 kPa (P = .028) for tricuspid aortic valve-ascending thoracic aortic aneurysms in systole. These stresses did not correlate to diameter for bicuspid aortic valve-ascending thoracic aortic aneurysms (r = -0.004) but had better correlation to tricuspid aortic valve-ascending thoracic aortic aneurysms diameter (r = 0.677). Longitudinal stresses on sinotubular junction were significantly higher in bicuspid aortic valve-ascending thoracic aortic aneurysms than in tricuspid aortic valve-ascending thoracic aortic aneurysms (405 vs 329 kPa, P = .023). Bicuspid aortic valve-ascending thoracic aortic aneurysm 99th-percentile circumferential stresses were 548 kPa versus 462 kPa (P = .033) for tricuspid aortic valve-ascending thoracic aortic aneurysms, which also did not correlate to bicuspid aortic valve-ascending thoracic aortic aneurysm diameter (r = 0.007). CONCLUSIONS: Circumferential and longitudinal stresses were greater in bicuspid aortic valve- than tricuspid aortic valve-ascending thoracic aortic aneurysms and were more pronounced in the sinotubular junction. Peak wall stress did not correlate with bicuspid aortic valve-ascending thoracic aortic aneurysm diameter, suggesting diameter alone in this population may be a poor predictor of dissection risk. Our results highlight the need for patient-specific aneurysm wall stress analysis for accurate dissection risk prediction.

来源:J Thorac Cardiovasc Surg,查看原文。版权归原作者所有。

引用

  1. Xuan Y, Wang Z, Liu R, et al. Wall stress on ascending thoracic aortic aneurysms with bicuspid compared with tricuspid aortic valve. J Thorac Cardiovasc Surg. 2018. PMID: 29656820. doi:10.1016/j.jtcvs.2018.03.004

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。