ConVes:无缝线主动脉移植物吻合装置
本研究评估一种无缝线主动脉吻合装置以简化左心室辅助装置植入。在两头猪心脏跳动下完成四例主动脉吻合,平均吻合时间8.1分钟,支架使流出道人工血管以45度角植入。概念验证研究显示该装置可行且短期成功,需进一步临床前研究评估吻合长期耐久性。
要点
- 无缝线吻合装置在猪心脏跳动下完成四例升主动脉吻合,无需阻断或体外循环。
- 平均吻合时间8.1分钟,仅需口头指导术者即可完成操作。
- 支架设计使流出道人工血管以预期45度角植入。
核心结论
- 该概念验证研究证明所提出的无缝线吻合装置可行且短期成功。
研究设计与样本
- 在两头猪心脏跳动下完成四例升主动脉吻合,无需阻断或体外循环。
主要发现
- 手术快速简单,平均吻合时间8.1分钟,仅需口头指导术者。
- 支架设计使流出道人工血管以预期45度角植入。
局限性
- 需进一步临床前研究评估吻合的长期耐久性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Less invasive left ventricular assist device implantation became feasible with the development of smaller devices. This study evaluated a sutureless aortic anastomosis device to facilitate the implant procedure. DESCRIPTION: The novel anastomotic device deploys and anchors an acute-angled stent in the aortic wall to create a sutureless outflow graft anastomosis in the ascending aorta. Four aortic anastomoses were performed on the beating hearts of two pigs without cross-clamping or cardiopulmonary bypass. EVALUATION: The procedure was fast and simple. The time of anastomosis averaged 8.1 minutes, with merely oral instructions to the operating surgeon. The design of the stent allowed the outflow graft to be implanted with the intended angulation of 45 degrees. CONCLUSIONS: This proof-of-concept study demonstrates the feasibility and short-term success of the proposed sutureless anastomotic device. Further preclinical studies are necessary to evaluate long-term durability of the anastomosis.
引用
- Dual SA, Muller A, Boës S, et al. ConVes: The Sutureless Aortic Graft Anastomotic Device. Ann Thorac Surg. 2018. PMID: 29530280. doi:10.1016/j.athoracsur.2017.11.010
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。