文献速递先天性心脏病外科

虚拟手术规划、血流模拟与三维静电纺丝制备患者特异性移植物以优化Fontan血流动力学

Virtual surgical planning, flow simulation, and 3-dimensional electrospinning of patient-specific grafts to optimize Fontan hemodynamics.
PubMed 文献 · J Thorac Cardiovasc Surg · 2017-12-05

本研究基于2例既往Fontan手术患者的心脏磁共振数据构建三维模型,通过计算流体动力学模拟探索管状与分叉管道设计,发现分叉管道改善左右肺动脉肝血流分布,两种管道均降低功率损失,体外流环实验支持模拟结果,并成功静电纺丝制备组织工程血管移植物。

要点

  • 基于2例患者磁共振数据构建Fontan三维模型并进行计算流体动力学模拟。
  • 分叉管道改善左右肺动脉间肝血流分布,管状与分叉管道均降低功率损失。
  • 体外流环实验支持计算流体动力学结果,设计成功静电纺丝为组织工程血管移植物。

核心结论

  • 独特的虚拟心脏手术方法有望在术前制造患者特异性设计,基于对商用图像分割、计算机辅助设计与血流模拟的改进,实现平衡的肝血流分布与最小功率损失。

研究设计与样本

  • 研究利用2例既往Fontan手术患者的心脏磁共振成像数据,使用标准图像分割与几何重建软件创建原生Fontan几何的三维模型。
  • 对每例患者,在计算机中探索替代设计,包括管状与分叉管道,并通过计算流体动力学模拟探测其功率损失与肝血流分布性能。

主要发现

  • 计算流体动力学模拟显示,分叉管道改善左右肺动脉之间的肝血流分布,而两种管道均降低功率损失。
  • 体外流环腔测试支持计算流体动力学结果。
  • 所提出的设计成功静电纺丝为组织工程血管移植物。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Despite advances in the Fontan procedure, there is an unmet clinical need for patient-specific graft designs that are optimized for variations in patient anatomy. The objective of this study is to design and produce patient-specific Fontan geometries, with the goal of improving hepatic flow distribution (HFD) and reducing power loss (Ploss), and manufacturing these designs by electrospinning. METHODS: Cardiac magnetic resonance imaging data from patients who previously underwent a Fontan procedure (n = 2) was used to create 3-dimensional models of their native Fontan geometry using standard image segmentation and geometry reconstruction software. For each patient, alternative designs were explored in silico, including tube-shaped and bifurcated conduits, and their performance in terms of Ploss and HFD probed by computational fluid dynamic (CFD) simulations. The best-performing options were then fabricated using electrospinning. RESULTS: CFD simulations showed that the bifurcated conduit improved HFD between the left and right pulmonary arteries, whereas both types of conduits reduced Ploss. In vitro testing with a flow-loop chamber supported the CFD results. The proposed designs were then successfully electrospun into tissue-engineered vascular grafts. CONCLUSIONS: Our unique virtual cardiac surgery approach has the potential to improve the quality of surgery by manufacturing patient-specific designs before surgery, that are also optimized with balanced HFD and minimal Ploss, based on refinement of commercially available options for image segmentation, computer-aided design, and flow simulations.

来源:J Thorac Cardiovasc Surg,查看原文。版权归原作者所有。

引用

  1. Siallagan D, Loke YH, Olivieri L, et al. Virtual surgical planning, flow simulation, and 3-dimensional electrospinning of patient-specific grafts to optimize Fontan hemodynamics. J Thorac Cardiovasc Surg. 2017. PMID: 29361303. doi:10.1016/j.jtcvs.2017.11.068

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。