文献速递先天性心脏病外科

虚拟现实在复杂心脏手术规划中的应用

Virtual reality in planning complex heart surgery.
PubMed 文献 · J Thorac Cardiovasc Surg · 2026-05-04

该研究评估了三维虚拟现实和三维打印技术在复杂先天性心脏病双心室或1.5心室修复术中辅助心室内隧道设计的转化工具。20例患者中,虚拟挡板形态学与3D打印及纸质模板一致,偏差小于10%,所有挡板按数字规划单补片放置,无残余,无手术死亡。早期探索显示基于3D虚拟现实的挡板规划具有转化潜力,纸质可打印模板工作流程前景良好。

要点

  • 虚拟现实规划心室内隧道可预测术中解剖,20例修复全部成功。
  • 虚拟、3D打印和纸质挡板模板形态学一致,偏差小于10%。
  • 所有挡板按计划单补片放置,无残余,中位随访20个月无再干预。

核心结论

  • 基于3D虚拟现实的挡板规划在复杂先天性心脏病心室内隧道手术中早期转化效果令人鼓舞。
  • 创建纸质可打印挡板模板的工作流程显示出很大前景。

研究设计与样本

  • 前瞻性复杂先天性心脏病病例的CT数据转换为数字孪生,在3D虚拟现实中使用医学建模软件分析。
  • 共20例,平均年龄8.61±7.61岁,包括右室双出口12例、双室双出口1例、矫正型大动脉转位5例、D型大动脉转位2例变异。
  • 虚拟挡板设计工具模拟挡板形态学,并转换为柔性树脂3D打印、刚性树脂数字展开打印和普通纸打印的物理模板。

主要发现

  • 手术所见与预测一致,修复率100%(双心室修复14例,1.5心室修复6例)。
  • 虚拟、3D打印和纸打印挡板的形态学完全相同,成功用作手术导引,偏离预测几何形状小于10%。
  • 所有挡板均为单补片,按数字规划放置,无残余。
  • 平均体外循环时间322±109分钟,主动脉阻断时间159±54分钟。
  • 中位住院时间10天(四分位距8-16),无手术死亡,中位随访20个月无再干预或残余。

关键数值与推荐

  • 虚拟、3D打印和纸打印挡板形态学一致,偏差小于10%。
  • 修复率100%,双心室修复14例,1.5心室修复6例。
  • 平均体外循环时间322±109分钟,主动脉阻断时间159±54分钟。
  • 中位住院时间10天(四分位距8-16),无手术死亡。
  • 中位随访20个月无再干预或残余。

临床怎么用

  • 对于复杂先天性心脏病需心室内隧道者,可利用3D虚拟现实进行数字解剖、测量和挡板模拟。
  • 虚拟挡板可转换为3D打印或纸质模板作为手术导引,形态学一致且偏差小。
  • 该工作流程有助于按计划放置单补片挡板,减少残余。

局限性

  • 早期阶段探索,样本量较小(20例)。
  • 单中心前瞻性研究,需更大样本验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Intraventricular tunneling is a pivotal step in biventricular or 1.5 ventricle repair of complex congenital heart disease, conventionally reliant on surgeon's intraoperative inspection and judgement. We evaluated novel assistive processes and translational tools for aiding intraventricular tunneling during complex surgical repairs using 3-dimensional virtual reality and 3-dimensional printing technologies. METHODS: Computed tomography data of prospective complex congenital heart disease cases considered for biventricular/1.5 ventricle repair with intraventricular tunneling were converted to "digital twins" and analyzed in 3-dimensional virtual reality using medical modeling software. Digital dissection, annotation, and measurement tools helped identify critical anatomic elements: interventricular septum to great vessel orientation, optimal pathway least likely to obstruct, dynamic changes, conduit requirement, and so forth. Virtual baffle design tool simulated baffles with morphometrics. Novel workflows helped convert virtual baffles to physical templates: 3-dimensionally printed in flexible resin, digitally unfolded and printed in rigid resin, and on plain paper. Templates were compared and used as surgical guides. Adherence to simulation-based plans and surgical baffle placement were assessed. RESULTS: Twenty cases (mean age 8.61 ± 7.61 years) included double outlet right ventricles (n = 12; 2 with superior-inferior ventricles, 2 with common atrioventricular canal), double outlet both ventricles (1), corrected transposition (5), and D-transposition (2) variants. Situs abnormalities (5/20), dextrocardia (7/20), and additional defects added to the complexity. Operative findings were as predicted, and repair was achieved in 100% (2 ventricle repair in 14 patients and 1.5 ventricle repair in 6 patients). Morphometrics of virtual, 3-dimensional printed, and paper-printed baffles were identical and successfully used as surgical guides; deviation from predicted geometry was less than 10%. All baffles were single patch, placed as per digital plan, with no residuals. Mean cardiopulmonary bypass time was 322 ± 109 minutes, and crossclamp time was 159 ± 54 minutes. Median hospital stay was 10 days (interquartile range, 8-16) with no operative mortality. No reinterventions or residuals were observed at 20 months median follow-up. CONCLUSIONS: Early-stage exploration of translational impact of 3-dimensional virtual reality-based baffle planning is encouraging. Workflow for creating paper-printable baffle templates shows great promise.

来源:J Thorac Cardiovasc Surg,查看原文。版权归原作者所有。

引用

  1. Maya HA, Kottayil BP, Pandey AK, et al. Virtual reality in planning complex heart surgery. J Thorac Cardiovasc Surg. 2026. PMID: 42092499. doi:10.1016/j.jtcvs.2026.03.616

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。