3D打印用于二尖瓣疾病:系统综述
该系统综述检索PubMed与MEDLINE数据库1996年至2025年8月的文献,纳入63项与二尖瓣疾病3D打印技术相关的研究,提取影像模态、软件工具、打印技术、材料、建模总时间与临床应用等数据。结果显示CT、三维经食管超声心动图和MRI为主要影像模态,打印以立体光刻、熔融沉积成型和PolyJet为主,从图像采集到模型完成的总处理时间为45分钟至72小时,应用涵盖手术规划、外科培训与医学教育及模拟设备开发。
要点
- CT是二尖瓣疾病3D打印最常用的影像模态,三维经食管超声心动图与MRI亦为主要手段
- 从图像采集到模型完成的总处理时间为45分钟至72小时,取决于复杂程度
- 3D打印主要用于手术规划、外科培训及医学与模拟教育设备开发
核心结论
- 3D打印通过实现精准规划与培训提升二尖瓣手术,尽管标准化与可及性等挑战仍存,影像、软件与材料的进步有望扩大其临床影响。
研究设计与样本
- 系统综述,检索PubMed与MEDLINE数据库1996年至2025年8月发表的文献,共纳入63项涉及二尖瓣疾病3D打印技术的研究。
主要发现
- CT、三维经食管超声心动图和MRI为主要影像模态,其中CT最常用。
- 数据分割与模型生成使用Mimics、3D Slicer和Philips QLAB等软件。
- 主要3D打印技术为立体光刻、熔融沉积成型和PolyJet,使用光聚合物树脂与热塑性塑料。
- 从图像采集到模型完成的总处理时间为45分钟至72小时,取决于复杂程度。
临床怎么用
- 可将3D打印模型用于二尖瓣疾病术前规划与外科培训,并开发医学与模拟教育设备。
局限性
- 标准化与可及性仍存在问题。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: Mitral valve disease remains one of the most prevalent and complex cardiac conditions, with treatment strategies varying based on anatomical and pathological factors. The heterogeneity in mitral valve morphology complicates standardized treatment, highlighting the importance of procedural planning and surgical training. This systematic review evaluates current techniques, materials, and clinical applications of 3D printing in mitral valve disease, with a focus on procedural planning and simulation. METHODS: A comprehensive literature search of PubMed and MEDLINE databases was conducted to identify studies published from 1996 to August 2025. A total of 63 studies were included, all involving 3D printing technologies related to mitral valve disease. Extracted data covered imaging modalities, software tools, printing techniques, materials used, total time required for model creation, and clinical applications. RESULTS: CT, 3D transoesophageal echocardiography, and MRI were the main imaging modalities, with CT being the most common. Data segmentation and model generation were performed using software such as Mimics, 3D Slicer, and Philips QLAB. The primary 3D printing techniques were stereolithography, fused deposition modelling, and PolyJet, using photopolymer resins and thermoplastics. Total processing time-from image acquisition to model completion-ranged from 45 min to 72 h, depending on complexity. Applications included procedural planning, surgical training, and the development of medical and simulation-based educational devices. CONCLUSIONS: 3D printing enhances mitral valve surgery by enabling precise planning and training. Although challenges like standardization and accessibility persist, advances in imaging, software, and materials are expected to expand its clinical impact.
引用
- Pavlykova-Chertovska A, Cheheili Sobbi S, Lazoryshynets V, et al. 3D Printing for Mitral Valve Disease: A Systematic Review. Interdiscip Cardiovasc Thorac Surg. 2026. PMID: 42191660. doi:10.1093/icvts/ivag155
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。