剑突下单孔机器人胸腺切除术(da Vinci Xi 系统)技术报告
本文报道一例不使用肋间入路的剑突下单孔机器人胸腺切除术,采用 da Vinci Xi 多孔机器人系统完成。手术在剑突下 1 cm 处做 4 cm 纵行切口,使用与 da Vinci 端口兼容的 AIRSEAL ROBOTIC SOLUTION 气封系统,以 8 mmHg 压力注入 CO2。作者认为该技术结合了剑突下入路的良好手术视野、微创性与机器人系统增强的可操作性。
要点
- 剑突下 1 cm 处做 4 cm 纵行切口,不经过肋间入路。
- 使用 AIRSEAL ROBOTIC SOLUTION 气封系统,CO2 压力为 8 mmHg。
- 关键技术为将镜头端口向前牵拉,避免其与其他端口在头侧相互碰撞。
核心结论
- 剑突下单孔机器人胸腺切除术使用 da Vinci Xi 系统,可结合剑突下入路的良好手术视野、微创性和机器人系统增强的可操作性。
研究设计与样本
- 技术报告,描述一例使用 da Vinci Xi 多孔机器人系统完成的剑突下单孔机器人胸腺切除术,未设对照、未报告样本量与随访。
主要发现
- 在剑突下 1 cm 处做 4 cm 纵行切口。
- 使用与 da Vinci 端口兼容的 AIRSEAL ROBOTIC SOLUTION 气封系统,以 8 mmHg 注入 CO2。
- 置入端口时左右手交叉进入伤口,镜头、左手、右手按从前胸到背侧的顺序置入。
- 为减少头侧端口间干扰,关键技术是将镜头端口向前牵拉,防止其与其他端口碰撞。
临床怎么用
- 可作为剑突下入路、无肋间切口的机器人胸腺切除术式参考,注重镜头端口前拉以避免端口碰撞。
局限性
- 本文为单例技术报告,未报告病例选择标准、围手术期结果、并发症与随访数据,技术可推广性尚待验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
We report subxiphoid uniportal robotic thymectomy without intercostal access using the da Vinci Xi multi-port robot system. A 4-cm vertical incision was made 1 cm caudal to the xiphoid process. The AIRSEAL ROBOTIC SOLUTION, an air seal system compatible with the da Vinci port was used to insufflate CO2 at 8 mmHg. During port insertion, the left and right hands were crossed into the wound, with the camera, left hand, and right hand inserted in the order from the anterior chest to the dorsal side. To reduce the interference between the ports at the head, a key technique is to pull the camera port forward to prevent it from colliding with the other ports. Subxiphoid uniportal robotic thymectomy using the da Vinci Xi is a technique that combines excellent surgical visibility from the subxiphoid process, minimal invasiveness and enhanced operability provided by the robotic system.
引用
- Suda T, Morota M, Negi T, et al. Subxiphoid uniportal robotic thymectomy using da Vinci Xi system†. Eur J Cardiothorac Surg. 2025. PMID: 40238185. doi:10.1093/ejcts/ezaf127
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。