文献速递主动脉外科瓣膜外科

交界高度与保留主动脉瓣根部替换术中移植物尺寸选择的关系

The association between commissural height and graft size selection in valve-sparing aortic root replacement†.
PubMed 文献 · Eur J Cardiothorac Surg · 2025-01-01

本研究使用新型主动脉根部测量器,在5个正常猪主动脉根部上应用6种不同直径的测量器,探讨交界高度与移植物尺寸的关系。结果发现交界高度与瓣环直径、自由缘长度、几何高度正相关,与测量器直径负相关。结论提示交界高度并非固定变量,而是与自体主动脉根部尺寸及植入移植物尺寸相互作用。

要点

  • 交界高度与瓣环尺寸、自由缘长度、几何高度正相关。
  • 交界高度与测量器直径负相关(r=-0.75)。
  • VSARR中选择移植物尺寸时需考虑交界高度与移植物直径的交互作用。

核心结论

  • 交界高度不是固定因素,而是与自体主动脉根部尺寸及植入移植物尺寸在VSARR中相互作用。

研究设计与样本

  • 使用新型半透明刚性管状测量器,在5个正常猪主动脉根部(瓣环直径23-31mm)上应用6种直径测量器(26、28、30、32、34、36mm),分析交界高度与基线解剖参数及测量器直径的相关性。

主要发现

  • 交界高度与瓣环尺寸正相关(r=0.55,P=0.002)。
  • 交界高度与自由缘长度正相关(r=0.54,P=0.002)。
  • 交界高度与几何高度正相关(r=0.51,P=0.004)。
  • 交界高度与测量器直径负相关(r=-0.75,P=0.002)。
  • 二元线性回归模型验证,调整各解剖参数后测量器直径与交界高度仍负相关(R2=0.83-0.87;所有P<0.001)。

临床怎么用

  • 在VSARR中选择移植物尺寸时,应认识到交界高度会随移植物直径变化,不宜将其视为固定参考值。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: For selecting graft sizes in valve-sparing aortic root replacement (VSARR), commissural height is often referenced as a fixed variable; however, it may be affected by the diameter of the graft implanted. Using a novel aortic root sizer, we explored whether commissural height interacts with graft size. METHODS: The novel sizer is a semi-translucent, rigid tube that is applied externally on the trimmed aortic root. It has 3 longitudinal slits with 120° orientation, which allows suspending the commissural stitches, symmetrically. The sizer is intended to identify the best graft size for a given anatomy by applying sizers of differing internal diameters, by which the quality of coaptation is inspected. Furthermore, each commissural slit is embedded with a ruler that allows measuring commissural heights. Using 5 normal porcine aortic roots with various annular diameters (23-31mm), we applied the 6 sizers in varying diameters (26, 28, 30, 32, 34 and 36 mm) on each of the root. We examined the correlations between the commissural height and baseline anatomical parameters and diameter of the sizer. RESULTS: The commissural height correlated positively with annular dimension (r = 0.55, P = 0.002), free-edge length (r = 0.54, P = 0.002), geometric height (r = 0.51, P = 0.004) and negatively with diameter of the sizer (r = -0.75, P = 0.002). Binary linear regression models validated that the sizer's diameter negatively correlated with the commissural height after adjustments with each of the anatomical parameters (R2, 0.83-0.87; P < 0.001 for all). CONCLUSION: Commissural height is not a fixed factor, but it interacts with the native aortic root size and the dimension of the implanted graft in VSARR.

来源:Eur J Cardiothorac Surg,查看原文。版权归原作者所有。

引用

  1. Sharir A, Shibata M, Park SJ, et al. The association between commissural height and graft size selection in valve-sparing aortic root replacement†. Eur J Cardiothorac Surg. 2025. PMID: 40128175. doi:10.1093/ejcts/ezaf104

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。