文献速递主动脉外科

升主动脉过度成角是急性A型主动脉夹层的危险因素:来自先进有限元模拟的证据

Ascending aorta over-angulation is a risk factor for acute type A aortic dissection: evidence from advanced finite element simulations.
PubMed 文献 · Eur J Cardiothorac Surg · 2025-01-01

研究通过有限元模拟评估升主动脉过度成角是否先于夹层发生及其对壁应力分布的影响。基于124名健康受试者建立的基线模型显示升-弓角<130°时纵向应力显著增加,15例夹层前患者特异性模型中升-弓角为113°±11°,峰值纵向应力区域与夹层破口位置对应。结论支持升-弓角可作为主动脉夹层预测指标。

要点

  • 升-弓角<130°时纵向壁应力显著增加,与夹层破口位置对应。
  • 夹层前患者升-弓角为113°±11°,峰值纵向应力区域对应破口位置。
  • 升-弓角可作为急性A型主动脉夹层的潜在预测指标。

核心结论

  • 升-弓角作为主动脉过度成角的量化指标,其狭窄低于130°增加纵向壁应力,夹层破口发生于纵向应力最高区域,支持其作为主动脉夹层预测指标。

研究设计与样本

  • 基于124名健康受试者舒张末期CT血管造影测量,通过神经网络工具创建基线有限元模型,修改模拟主动脉延长伴过度成角,获得升-弓角145°-110°的范式模型。
  • 从15例患者夹层前几何创建患者特异性有限元模型,比较最大纵向应力位点与夹层后影像破口位置。

主要发现

  • 范式模型显示升-弓角进行性狭窄与纵向应力增加相关,角度<130°时显著,对环向应力影响较不一致。
  • 夹层前患者特异性模型中升-弓角为113°±11°,峰值纵向应力区域与夹层后CT血管造影破口位置对应。

临床怎么用

  • 升-弓角测量可作为急性A型主动脉夹层风险评估的形态学参考,角度<130°提示纵向壁应力增加。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: To assess whether ascending aorta over-angulation, a morphological feature recently found to be associated with acute type A aortic dissection, precedes dissection and how it affects wall stress distribution. METHODS: A baseline finite element model, previously created by a neural network tool from end-diastolic computed tomography angiography measurements in 124 healthy subjects, was modified to simulate the over-angulation accompanying aortic elongation, obtaining paradigmatic models with different ascending angulations (ascending-arch angle 145°-110°). The models were discretized and embedded in a deformable continuum representing surrounding tissues, aortic wall anisotropy and nonlinearity were accounted for, pre-tensioning at diastolic pressures was applied and peak systolic stresses were computed. Then, from 15 patients' pre-dissection geometries, patient-specific finite element models of pre-dissection aorta were created through the same framework. The sites of maximum longitudinal stress were compared with the respective sites of dissection entry tear in post-dissection imaging. RESULTS: Paradigmatic models showed that progressive narrowing of the ascending-arch angle was associated with increasing longitudinal stress (becoming significant for angles <130°), whereas the impact on circumferential stress was less consistent. In pre-dissection patient-specific models, the ascending-arch angle was narrowed (113°±11°), and the region of peak longitudinal stresses corresponded to the entry tear location in the respective post-dissection computed tomography angiography. CONCLUSIONS: This study strongly supports the hypothesis that the ascending-arch angle, as quantifier of aorta over-angulation, can be a good predictor of aortic dissection, since its narrowing below 130° increases longitudinal wall stress, and the dissection entry tears develop in the aortic wall in areas of highest longitudinal stress.

来源:Eur J Cardiothorac Surg,查看原文。版权归原作者所有。

引用

  1. Ianniruberto I, Lo Presti F, Bifulco O, et al. Ascending aorta over-angulation is a risk factor for acute type A aortic dissection: evidence from advanced finite element simulations. Eur J Cardiothorac Surg. 2025. PMID: 39960884. doi:10.1093/ejcts/ezaf053

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。