三维成像与打印对室间隔心肌切除术效果的影响:单中心经验
该单中心研究纳入2007年1月至2022年3月268例症状性肥厚型梗阻性心肌病患者(梗阻处峰值压差≥50 mmHg),比较传统室间隔心肌切除术(n=112)与基于心脏三维建模的室间隔心肌切除术(n=156)。经倾向性评分匹配(14个变量)后每组77例,三维建模组切除心肌质量更大、无二尖瓣置换及医源性室间隔缺损病例、主要并发症更少、残余压差更低,长期随访主要不良心血管事件和心源性死亡累积发生率更低。结论认为基于三维虚拟和打印心脏模型的心肌切除术比传统手术更有效。
要点
- 三维建模组切除心肌质量10.0(SD 4.3)g vs 传统组5.2(SD 2.7)g,P<0.001。
- 三维建模组主要并发症6例(7.8%)vs 传统组17例(22.1%),P=0.011。
- 三维建模组5年主要不良心血管事件累积发生率3.8% vs 传统组16.9%,P=0.007。
核心结论
- 基于三维虚拟和打印心脏模型的室间隔心肌切除术比传统手术更有效。
研究设计与样本
- 单中心研究,2007年1月至2022年3月连续纳入268例症状性肥厚型梗阻性心肌病且梗阻处峰值压差≥50 mmHg的患者,传统心肌切除术112例,三维建模心肌切除术156例。
- 采用倾向性评分匹配(14个变量)形成两组各77例:组1PSM为传统心肌切除术,组2PSM为三维建模心肌切除术。
主要发现
- 组2PSM平均切除心肌质量10.0(SD 4.3)g vs 组1PSM 5.2(SD 2.7)g,P<0.001。
- 组2PSM无二尖瓣置换病例 vs 组1PSM 28例(36.4%),P<0.001;组2PSM无医源性室间隔缺损病例 vs 组1PSM 6例(7.8%),P=0.028。
- 组2PSM主要并发症6例(7.8%)vs 组1PSM 17例(22.1%),P=0.011。
- 组2PSM梗阻处残余峰值收缩压差7.0(5.0-9.0)mmHg vs 组1PSM 11.0(7.0-16.0)mmHg,P<0.001。
- 长期随访中,组2PSM vs 组1PSM:5年主要不良心血管事件累积发生率3.8%(95%CI 0.7-11.7%)vs 16.9%(95%CI 9.5-26.1%),P=0.007;心源性死亡累积发生率3.8%(95%CI 0.7-11.7%)vs 13%(95%CI 6.6-21.6%),P=0.05。
局限性
- 原文未述局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To assess changes in the results of septal myectomy (SM) following introduction of three-dimensional (3D) imaging and 3D printing in surgical interventions planning and performing in the single-centre settings. METHODS: Between January 2007 and March 2022, 268 consecutive symptomatic patients with hypertrophic obstructive cardiomyopathy and peak pressure gradient at obstruction area ≥50 mmHg underwent conventional SM (n = 112) or SM with heart 3D modelling (n = 156). RESULTS: For comparative analysis, we used propensity score matching (PSM) by 14 variables and there were formed group 1PSM (conventional SM, n = 77) and group 2PSM (3D-modelled SM, n = 77). It was noted for group 2PSM: larger mean resected myocardium mass [10.0 (standard deviation 4.3) vs 5.2 (standard deviation 2.7) g], P < 0.001, no mitral valve replacement cases [0 vs 28 (36.4%), P < 0.001], no iatrogenic ventricular septal defects cases [0 vs 6 (7.8%), P = 0.028], lower rate of major complications [6 (7.8%) vs 17 (22.1%), P = 0.011], smaller residual peak systolic gradient at the obstruction level [7.0 (5.0-9.0) vs 11.0 (7.0-16.0) mmHg, P < 0.001]. During the long-term follow-up, it was noted for group 2PSM as compared to group 1PSM: lower 5-year cumulative incidence of major adverse cardiovascular events [3.8% (95% confidence interval 0.7-11.7%) vs 16.9% (9.5-26.1%), P = 0.007] and cardiac-related death [3.8% (95% confidence interval 0.7-11.7%) vs 13% (95% confidence interval 6.6-21.6%), P = 0.05]. CONCLUSIONS: SM based on 3D virtual and printed heart models is more effective than conventional SM.
引用
- Andrushchuk U, Niavyhlas A, Adzintsou V, et al. Impact of three-dimensional imaging and printing on septal myectomy results-single centre's experience. Interdiscip Cardiovasc Thorac Surg. 2024. PMID: 39226213. doi:10.1093/icvts/ivae151
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。