文献速递先天性心脏病外科

三维打印模具制作先天性心脏病硅胶心脏模型用于儿科心脏外科医生培训

Three-dimensional printed moulds to obtain silicone hearts with congenital defects for paediatric heart-surgeon training.
PubMed 文献 · Eur J Cardiothorac Surg · 2022-01-01

研究旨在创建逼真且可负担的心脏和血管三维模拟模型以改善培训。使用免费开源软件分割一名23月龄右室双出口患者的磁共振图像,通过三维打印可重复使用模具制作硅胶心脏模型,并用软弹性硅胶(邵氏A硬度8)制作血管模型。结果显示血管模型培训缩短了住院医师操作时间并提高了评分,外科医生认为心脏模型逼真并能在其上完成Rastelli手术。作者认为该低成本方法可大幅降低先天性心脏病手术培训模型的成本。

要点

  • 软弹性硅胶(邵氏A硬度8)最接近人体血管组织。
  • 血管模型培训缩短了住院医师操作时间并提高了评分。
  • 外科医生能在硅胶心脏模型上完成Rastelli手术且认为其逼真。

核心结论

  • 使用免费分割软件、相对低成本的硅胶和基于可重复使用模具的技术,可大幅降低适用于先天性心脏缺陷手术培训的心脏模型成本。

研究设计与样本

  • 研究使用多种材料制作血管模型以筛选最接近人体血管组织的材料,并用该材料制作血管模型培训住院医师插管操作。
  • 对一名23月龄右室双出口患者的磁共振图像使用免费开源软件进行分割,通过三维打印的可重复使用模具制作硅胶心脏模型,由一名心脏外科医生模拟Rastelli手术。

主要发现

  • 最佳材料为软弹性硅胶(邵氏A硬度8)。
  • 在血管模型上培训降低了住院医师的操作时间并提高了其在性能评定量表上的评分。
  • 外科医生评价模制心脏模型逼真,并能在其上完成Rastelli手术。
  • 尽管瓣膜呈现不佳,但发现该模型对介入前培训有用。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Many types of congenital heart disease are amenable to surgical repair or palliation. The procedures are often challenging and require specific surgical training, with limited real-life exposure and often costly simulation options. Our objective was to create realistic and affordable 3D simulation models of the heart and vessels to improve training. METHODS: We created moulded vessel models using several materials, to identify the material that best replicated human vascular tissue. This material was then used to make more vessels to train residents in cannulation procedures. Magnetic resonance imaging views of a 23-month-old patient with double-outlet right ventricle were segmented using free open-source software. Re-usable moulds produced by 3D printing served to create a silicone model of the heart, with the same material as the vessels, which was used by a heart surgeon to simulate a Rastelli procedure. RESULTS: The best material was a soft elastic silicone (Shore A hardness 8). Training on the vessel models decreased the residents' procedural time and improved their grades on a performance rating scale. The surgeon evaluated the moulded heart model as realistic and was able to perform the Rastelli procedure on it. Even if the valves were poorly represented, it was found to be useful for preintervention training. CONCLUSIONS: By using free segmentation software, a relatively low-cost silicone and a technique based on re-usable moulds, the cost of obtaining heart models suitable for training in congenital heart defect surgery can be substantially decreased.

来源:Eur J Cardiothorac Surg,查看原文。版权归原作者所有。

引用

  1. Frei M, Reymond P, Wacker J, et al. Three-dimensional printed moulds to obtain silicone hearts with congenital defects for paediatric heart-surgeon training. Eur J Cardiothorac Surg. 2022. PMID: 38445719. doi:10.1093/ejcts/ezae079

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。