文献速递主动脉外科

分期手术创建B型主动脉夹层模型并采用血管内再干预模拟不同形态特征

Staged surgically created type B aortic dissection model with endovascular reintervention for different morphological features.
PubMed 文献 · Interdiscip Cardiovasc Thorac Surg · 2023-01-01

研究通过外科手术创建B型主动脉夹层(TBAD)猪模型,并随机分组行二次破口创建(STC)或假腔延长(FLE)的血管内再干预,观察1个月和3个月的解剖特征。12只动物中11只成功建立再干预诱导的TBAD模型(STC组6只,FLE组5只),STC组新破口术中平均直径7.23 mm,30天内轻度增加(P=0.0026);FLE组术中新生延长长度为(235.80±84.94)mm,1个月随访时假腔延长长度显著长于术中(P=0.0362)。组织学显示主动脉壁中膜弹性纤维断裂,假腔外膜侧显著拉伸。作者认为该血管内再干预是可靠、微创的方法,可产生不同形态的特定TBAD模型。

要点

  • 外科手术创建TBAD猪模型均成功,未发生非预期并发症。
  • 血管内再干预诱导TBAD模型在12只动物中成功11只(STC组6只,FLE组5只)。
  • STC组新破口30天内轻度增加(P=0.0026);FLE组1个月假腔延长长度显著长于术中(P=0.0362)。

核心结论

  • 作者的血管内再干预是可靠、微创的方法,可产生不同形态的特定TBAD模型。

研究设计与样本

  • 实验方案包括外科手术创建TBAD猪模型和血管内再干预诱导TBAD猪模型。
  • 样本随机分为2组:一组行二次破口创建(STC)操作,另一组行假腔延长(FLE)操作。
  • 在1个月和3个月观察解剖特征,每组2只动物在操作后3个月安乐死。
  • 整块获取主动脉和主要分支,横截面切取并准备组织学检查。

主要发现

  • 所有外科手术创建的TBAD模型均成功生成,未发生非预期并发症。
  • 血管内再干预诱导的TBAD模型在12只动物中成功建立11只,其中STC组6只,FLE组5只。
  • STC组术中新生二次破口平均直径为7.23 mm,在最初30天内观察到轻度增加(P=0.0026)。
  • FLE组术中新生延长长度为(235.80±84.94)mm,1个月随访时假腔延长长度显著长于术中测量值(P=0.0362)。
  • 组织学评估显示主动脉壁中膜层弹性纤维断裂,并在假腔外膜侧呈现显著拉伸。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Understanding morphology and how this relates to treatment strategy is critical for achieving remodelling in aortic dissection. A controllable and reproducible large animal model is required for investigating new therapeutic devices and interventions. METHODS: Our experimental protocol involved the development of surgically created type B aortic dissection (TBAD) and endovascular reintervention-induced TBAD porcine models. The sample was randomly divided into 2 groups: 1 underwent a secondary tear creation (STC) procedure and the other underwent a false lumen extension (FLE) procedure. Anatomical features were observed at 1 and 3 months, and 2 animals in each group were euthanized at 3 months after the procedures. The aorta and main branches were harvested en bloc, cross-sectioned and prepared for histological examination. RESULTS: All surgically created TBAD models were successfully generated, and no unintended complications occurred. The endovascular reintervention-induced TBAD model was successfully created in 11 of 12 animals, with 6 in the STC group and 5 in the FLE group. In the STC group, the intraoperative mean diameter of the new secondary tear was 7.23 mm, and a slight increase was observed at first 30 days (P = 0.0026). In the FLE group, the intraoperative new propagation length was (235.80 ± 84.94) mm. The FL propagation length at the 1-month follow-up was significantly longer than that measured intraoperatively (P = 0.0362). Histological evaluation demonstrated that the elastic fibres in the media layer of the aortic wall were disrupted and appeared to be significantly stretched on the adventitial side of the false lumen. CONCLUSIONS: Our endovascular reintervention is a reliable, minimally invasive approach for producing specific TBAD models with different morphologies.

来源:Interdiscip Cardiovasc Thorac Surg,查看原文。版权归原作者所有。

引用

  1. Guo B, Akhtar R, Liu H, et al. Staged surgically created type B aortic dissection model with endovascular reintervention for different morphological features. Interdiscip Cardiovasc Thorac Surg. 2023. PMID: 37561091. doi:10.1093/icvts/ivad133

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。