文献速递先天性心脏病外科

3D打印与虚拟现实优化右室双出口患者术前规划:一项先导研究

Optimized preoperative planning of double outlet right ventricle patients by 3D printing and virtual reality: a pilot study.
PubMed 文献 · Interdiscip Cardiovasc Thorac Surg · 2023-01-01

本研究回顾性选取5例不同亚型右室双出口(DORV)患者,基于高质量CT构建3D打印与3D虚拟现实(3D-VR)模型,由3家医院的12名先天性心脏病外科医生和儿科心脏病学家依次评估2D-CT、3D打印和3D-VR模型。结果显示3D方法对空间关系的显示优于2D,3D-VR对室间隔缺损补片闭合可行性的判定最佳(3D-VR 92%、3D打印66%、超声/CT 46%,P < 0.01),基于3D-VR提出的手术方案与实际手术符合率为80%。

要点

  • 3D打印与3D-VR对DORV心脏空间关系的显示优于2D超声/CT。
  • 室间隔缺损补片闭合可行性判定:3D-VR 92% vs 3D打印66% vs 超声/CT 46%(P < 0.01)。
  • 手术方案与实际手术符合率:超声/CT 66%、3D打印78%、3D-VR 80%。

核心结论

  • 3D打印和3D-VR较2D成像对心脏外科医生和心脏病学家有附加价值,因空间关系显示更好,基于3D可视化提出的手术方案与实际实施手术的匹配程度更高。

研究设计与样本

  • 回顾性选取5例不同DORV亚型且CT扫描质量高的患者,构建3D打印与3D-VR模型。
  • 来自3家医院的12名先天性心脏病外科医生和儿科心脏病学家先观看2D-CT,随后以随机顺序评估3D打印和3D-VR模型,每种成像方法后填写关于关键结构可视性和手术方案的问卷。

主要发现

  • 3D方法(3D打印/3D-VR)对空间关系的显示总体优于2D。
  • 室间隔缺损补片闭合可行性的判定以3D-VR重建最佳:3D-VR 92%、3D打印66%、超声/CT 46%,P < 0.01。
  • 基于超声/CT、3D打印和3D-VR可视化提出的手术方案与实际实施手术的符合率分别为66%、78%和80%。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: In complex double outlet right ventricle (DORV) patients, the optimal surgical approach may be difficult to assess based on conventional 2-dimensional (2D) ultrasound (US) and computed tomography (CT) imaging. The aim of this study is to assess the added value of 3-dimensional (3D) printed and 3D virtual reality (3D-VR) models of the heart used for surgical planning in DORV patients, supplementary to the gold standard 2D imaging modalities. METHODS: Five patients with different DORV subtypes and high-quality CT scans were selected retrospectively. 3D prints and 3D-VR models were created. Twelve congenital cardiac surgeons and paediatric cardiologists, from 3 different hospitals, were shown 2D-CT first, after which they assessed the 3D print and 3D-VR models in random order. After each imaging method, a questionnaire was filled in on the visibility of essential structures and the surgical plan. RESULTS: Spatial relationships were generally better visualized using 3D methods (3D printing/3D-VR) than in 2D. The feasibility of ventricular septum defect patch closure could be determined best using 3D-VR reconstructions (3D-VR 92%, 3D print 66% and US/CT 46%, P < 0.01). The percentage of proposed surgical plans corresponding to the performed surgical approach was 66% for plans based on US/CT, 78% for plans based on 3D printing and 80% for plans based on 3D-VR visualization. CONCLUSIONS: This study shows that both 3D printing and 3D-VR have additional value for cardiac surgeons and cardiologists over 2D imaging, because of better visualization of spatial relationships. As a result, the proposed surgical plans based on the 3D visualizations matched the actual performed surgery to a greater extent.

来源:Interdiscip Cardiovasc Thorac Surg,查看原文。版权归原作者所有。

引用

  1. Peek JJ, Bakhuis W, Sadeghi AH, et al. Optimized preoperative planning of double outlet right ventricle patients by 3D printing and virtual reality: a pilot study. Interdiscip Cardiovasc Thorac Surg. 2023. PMID: 37202357. doi:10.1093/icvts/ivad072

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。