文献速递气道管理

低成本3D打印支气管镜模拟器的随机对照试验评估

A randomised, controlled trial evaluating a low cost, 3D-printed bronchoscopy simulator.
PubMed 文献 · Anaesthesia · 2017-06-12

本研究基于胸部CT扫描用3D打印技术制作低成本支气管树模拟器,并与两款商用模拟器比较。3D打印模拟器在右肺上叶支气管开口定位和整体真实感上评分最高,成本仅85英镑,远低于商用模拟器超过约2000英镑。

要点

  • 3D打印模拟器在右肺上叶支气管开口定位上评分最高(p=0.002)。
  • 整体真实感3D打印模拟器评分最高(p=0.021)。
  • 成本85英镑,远低于商用模拟器超过约2000英镑。

核心结论

  • 3D打印模拟器在右肺上叶支气管开口定位和整体真实感上评分最高,且成本显著低于商用模拟器。
  • 在支气管封堵器置入和液体抽吸方面与商用模拟器无差异。

研究设计与样本

  • 基于人体胸部CT扫描用快速成型(3D打印)技术制作支气管树模拟器。
  • 与Laerdal® Airway Management Trainer with Bronchial Tree和AirSim Advance Bronchi商用模拟器比较。

主要发现

  • 右肺上叶支气管开口定位评分3D打印模拟器最高(p=0.002)。
  • 支气管封堵器置入左主支气管评分无差异(p=0.792)。
  • 右肺下叶液体抽吸评分无差异(p=0.057)。
  • 整体真实感评分3D打印模拟器最高(p=0.021)。

关键数值与推荐

  • VAS评分0 mm=解剖完全不真实,100 mm=与真实患者无法区分。
  • 3D打印模拟器成本85英镑(100欧元/110美元),商用模拟器超过约2000英镑(2350欧元/2590美元)。

临床怎么用

  • 3D打印模拟器可作为学习支气管镜技能的廉价替代方案。
  • 可在临床实践前用患者特异性模型练习操作。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Low-fidelity, simulation-based psychomotor skills training is a valuable first step in the educational approach to mastering complex procedural skills. We developed a cost-effective bronchial tree simulator based on a human thorax computed tomography scan using rapid-prototyping (3D-print) technology. This randomised, single-blind study evaluated how realistic our 3D-printed simulator would mimic human anatomy compared with commercially available bronchial tree simulators (Laerdal® Airway Management Trainer with Bronchial Tree and AirSim Advance Bronchi, Stavanger, Norway). Thirty experienced anaesthetists and respiratory physicians used a fibreoptic bronchoscope to rate each simulator on a visual analogue scale (VAS) (0 mm = completely unrealistic anatomy, 100 mm = indistinguishable from real patient) for: localisation of the right upper lobe bronchial lumen; placement of a bronchial blocker in the left main bronchus; aspiration of fluid from the right lower lobe; and overall realism. The 3D-printed simulator was rated most realistic for the localisation of the right upper lobe bronchial lumen (p = 0.002), but no differences were found in placement of a bronchial blocker or for aspiration of fluid (p = 0.792 and p = 0.057) compared with using the commercially available simulators. Overall, the 3D-printed simulator was rated most realistic (p = 0.021). Given the substantially lower costs for the 3D-printed simulator (£85 (€100/US$110) compared with > ~ £2000 (€2350/US$2590) for the commercially available simulators), our 3D-printed simulator provides an inexpensive alternative for learning bronchoscopy skills, and offers the possibility of practising procedures on patient-specific models before attempting them in clinical practice.

来源:Anaesthesia,查看原文。版权归原作者所有。

引用

  1. Pedersen TH, Gysin J, Wegmann A, et al. A randomised, controlled trial evaluating a low cost, 3D-printed bronchoscopy simulator. Anaesthesia. 2017. PMID: 28603907. doi:10.1111/anae.13951

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。