文献速递区域麻醉与超声

三维打印患者特异性胸椎模型作为任务训练器

Use of 3-Dimensional Printing to Create Patient-Specific Thoracic Spine Models as Task Trainers.
PubMed 文献 · Reg Anesth Pain Med · 2017-01-01

触觉保真度评分为中性(3.08、3.06、3.0),超声引导和整体适用性评分较高(4.85和4.0)。结论认为可用三维打印开发自制低成本高保真超声引导模拟器用于住院医师胸段硬膜外培训。

要点

  • 三维打印可制作低成本患者特异性胸椎硬膜外训练模型。
  • 模型触觉保真度中性,超声引导保真度评分高。
  • 该模型有望用于住院医师胸段硬膜外操作培训。

核心结论

  • 利用三维打印技术可开发自制、低成本、患者特异性且高保真的超声引导模拟器,用于住院医师胸段硬膜外培训。

研究设计与样本

  • 获取正常和脊柱后凸患者的胸椎CT扫描数据,分割脊柱并三维打印模型,置于定制木箱中填充不同硅胶模拟人体组织,由本院主治医师测试并填写问卷,采用Likert评分。

主要发现

  • 开发模拟器模型耗时不到4天,材料成本约400美元。

临床怎么用

  • 可用于住院医师胸段硬膜外操作培训,尤其提升超声引导下的操作技能。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND AND OBJECTIVES: Thoracic epidural anesthesia is a technically challenging procedure with a high failure rate of 24% to 32% nationwide. Residents in anesthesiology have limited opportunities to practice this technique adequately, and there are no training tools available for this purpose. Our objective was to build a low-cost patient-specific thoracic epidural training model. METHODS: We obtained thoracic computed tomography scan data from patients with normal and kyphotic spine. The thoracic spine was segmented from the scan, and a 3-dimensional model of the spine was generated and printed. It was then placed in a customized wooden box and filled with different types of silicone to mimic human tissues. Attending physicians in our institution then tested the final model. They were asked to fill out a brief questionnaire after the identification of the landmarks and epidural space using ultrasound and real-time performance for a thoracic epidural on the model (Supplemental Digital Content 1, http://links.lww.com/AAP/A197). Likert scoring system was used for scoring. RESULTS: The time to develop this simulator model took less than 4 days, and the materials cost approximately $400. Fourteen physicians tested the model for determining the realistic sensation while palpating the spinous process, needle entry through the silicone, the "pop" sensation and ultrasound fidelity of the model. Whereas the tactile fidelity scores were "neutral" (3.08, 3.06, and 3.0, respectively), the ultrasound guidance and overall suitability for residents were highly rated as being the most realistic (4.85 and 4.0, respectively). CONCLUSIONS: It is possible to develop homemade, low-cost, patient-specific, and high-fidelity ultrasound guidance simulators for resident training in thoracic epidurals using 3-dimensional printing technology.

来源:Reg Anesth Pain Med,查看原文。版权归原作者所有。

引用

  1. Jeganathan J, Baribeau Y, Bortman J, et al. Use of 3-Dimensional Printing to Create Patient-Specific Thoracic Spine Models as Task Trainers. Reg Anesth Pain Med. 2017. PMID: 28263243. doi:10.1097/AAP.0000000000000580

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。