分体式热射病急救衣的设计与应用
本文介绍解放军总医院第八医学中心重症医学科医护人员设计的分体式热射病急救衣。该急救衣由无袖上衣、帽子、袖子和包裹裤四部分组成,采用细孔硅胶颗粒与硝酸钾制成的变温面料,通过注水袋控制注水量以保证每次相同制冷效果,使用温度14-18℃。适用于缺乏医疗物资和水的恶劣环境转运中热射病患者,便于携带、使用准确、成本低且可重复使用,已获国家实用新型专利。
要点
- 热射病若不快速有效治疗死亡率高达50%,早期快速有效降温是关键。
- 劳力性热射病在30分钟内将核心体温降至38.9℃可获更好临床结局和最少并发症。
- 「黄金30分钟」不足以完成急救转运和评估,需适用于现场和转运的急救衣。
- 分体式急救衣由无袖上衣、帽子、袖子和包裹裤组成,采用变温面料,使用温度14-18℃。
- 该急救衣适用于缺乏医疗物资和水的恶劣环境转运中热射病患者,可重复使用且成本低。
适用人群与场景
- 适用于热射病患者,在缺乏医疗物资和水的恶劣环境转运中使用。
诊断标准与关键阈值
- 治疗目标:劳力性热射病在30分钟内将核心体温降至38.9℃。
处置流程与药物剂量
- 使用分体式热射病急救衣,由无袖上衣、帽子、袖子和包裹裤四部分组成,通过连接件连接成整体便于固定和转运。
- 通过注水袋控制注水量,确保每次向急救衣注入相同水量以获得相同制冷效果。
- 急救衣使用温度为14-18℃,长时间使用不会导致局部冻伤。
红旗征与不能漏的情况
- 热射病若不快速有效治疗,死亡率高达50%。
研究设计与关键结果
- 原文为器械设计与应用描述,未报告研究设计、样本量或统计结果。
- 设计者获得国家实用新型专利(ZL 2020 2 1627326.4)。
证据类型、等级与局限
- 证据类型:器械设计描述(原文未提及证据等级)。
- 局限:原文未报告临床验证数据。
对床旁实践的改变
- 可在缺乏医疗物资和水的现场及转运中,使用分体式热射病急救衣对热射病患者进行早期快速有效降温。
- 该急救衣便于携带、使用准确、成本低且可重复使用,适用于现场急救和转运。
指南或共识出处
- 原文未提及
以上提炼依据论文摘要(全文未开放获取,或许可不允许翻译转载);全文请点「阅读原文」。
英文原文(摘要)· 点击展开
In the trend of global warming and the increasing number of participating in high-intensity sports, the incidence of heat stroke is increasing year by year. Heat stroke is categorized to the class of heat emergent diseases. If there is no quick and effective treatment, the mortality rate is as high as 50%. Early, rapid, and effective cooling is the key point in the treatment of heat stroke. The early recognition and rapid lowering the core body temperature to 38.9 centigrade within 30 minutes of exertional heat stroke results in better clinical outcome with the fewest complications, however, the "golden 30 minutes" is far from enough to complete emergency transport and evaluation. Therefore, it is urgent to develop a first aid suit for heat stroke suitable for field treatment and transportation, so as to achieve the treatment goal of early rapid and effective cooling in field environment. For this purpose, the medical staff of the department of critical care medicine of the Eighth Medical Center of the Chinese People's Liberation Army General Hospital designed and developed the split first aid suit, which is suitable for heat stroke patient in the harsh environment lacking medical supplies and water during transportation. The medical staff who designed the first aid suit obtained a National Utility Model Patent of China (ZL 2020 2 1627326.4). The split heat stroke first aid suit is composed of four main parts: a sleeveless coat, a hat, sleeves and wrapped pants. All of them are made by temperature changeable fabric which is a composite material made by fine porous silica gel particles and potassium nitrate. The cuffs of the sleeveless top of the clothes part and the sleeves are connected as a whole by the connecting pieces; and the front end of the hem of the clothes part and the wrapped trousers are also connected as a whole by the connecting pieces, which is convenient for fixing and transportation. In order to control the water injection quantity, the water injection bag and the corresponding components are designed to ensure the same amount of water can be injected to the heat stroke first aid suit at each time, so the same frigorific effect can be attainable. The service temperature is 14-18 centigrade, so it will not cause local frostbite to patients when used for a long time. This split-type first aid suit can be used in the movement, rescue and transportation of heat stroke patients. It is easy to carry and use with accurate cooling effect with low cost, moreover, it is reusable and can be widely used for on-site emergency and transportation of heat stroke patients.
参考来源
- Zhang Y, Liu Y. [Design and application of a split first aid suit for heat stroke]. Zhonghua Wei Zhong Bing Ji Jiu Yi Xue. 2021. PMID: 34412762. doi:10.3760/cma.j.cn121430-20210330-00460
供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。