文献速递重症综合管理与镇静镇痛心脑血管急症

失效模式与效应分析:构建更安全的神经重症监护转运

Failure Mode and Effect Analysis: Engineering Safer Neurocritical Care Transitions.
PubMed 文献 · Neurocrit Care · 2021-01-05
一句话结论应用FMEA方法优化神经重症患者院际转运流程,可缩短急诊停留时间并提升跨学科沟通率。

该文介绍失效模式与效应分析(FMEA)作为系统工程方法应用于神经重症监护转运。作者组建多学科团队,绘制转运流程地图,识别失效模式并进行风险分析,优先干预高影响环节。实施后急诊停留时间从300分钟降至149分钟(p<.01),神经ICU与急诊主治医师在患者到达前讨论治疗的比例从10%升至64%。结论认为FMEA可带来有意义且持续的过程改进。

要点

  • FMEA多学科团队需绘制完整转运流程地图,识别各子过程的失效模式并进行风险分析。
  • 优先干预对患者安全和结局影响最大的失效模式,制定并实施重新设计流程的行动计划。
  • 实施后急诊停留时间从300分钟降至149分钟(p<.01),提示吞吐效率显著改善。
  • 神经ICU与急诊主治医师在患者到达前讨论治疗的比例从10%升至64%,跨学科沟通改善。
  • 需建立综合评估方法监测结局并重新实施干预,以实现持续改进。

适用人群与场景

  • 需院际转运的神经重症监护患者,原文具体描述为脑出血和蛛网膜下腔出血患者。
  • 场景为医院间转运过程,涉及多学科、多机构提供者的多次交接。

诊断标准与关键阈值

  • 原文未提及

处置流程与药物剂量

  • 第一步:组建多学科团队。
  • 第二步:绘制成功转运所需全部组件的流程地图。
  • 第三步:识别阻碍每个子过程完成的「失效模式」或错误。
  • 第四步:对每个失效模式进行风险或危害分析,识别并优先处理对患者安全和结局影响最大的失效模式。
  • 第五步:制定干预措施并纳入行动计划以重新设计流程。
  • 第六步:建立综合评估方法监测结局并重新实施干预,以实现持续改进。

红旗征与不能漏的情况

  • 原文未提及

研究设计与关键结果

  • 研究类型为质量改进项目,描述FMEA在神经重症转运中的本地实施经验,非对照研究。
  • 实施FMEA干预后,急诊停留时间从300分钟降至149分钟(p<.01)。
  • 实施后,神经ICU和急诊主治医师在患者到达前讨论治疗的比例从干预前10%升至干预后64%。
  • 原文未报告样本量、中心数、其他次要终点或不良事件。

证据类型、等级与局限

  • 证据类型为单中心质量改进项目描述,非RCT或系统评价。
  • 局限:原文未明确报告样本量、对照设计及统计方法细节;为本地实施经验,外推需谨慎。

对床旁实践的改变

  • 可借鉴FMEA方法系统梳理神经重症院际转运流程,识别并优先干预高影响失效模式。
  • 适用人群为需院际转运的脑出血和蛛网膜下腔出血患者;其他神经重症人群原文未提及。
  • 实施中需建立多学科团队并绘制流程地图,否则可能遗漏关键失效模式。
  • 需建立持续监测与再干预机制,否则改进可能无法维持。

指南或共识出处

  • 原文未提及

以上提炼依据论文摘要(全文未开放获取,或许可不允许翻译转载);全文请点「阅读原文」。

英文原文(摘要)· 点击展开

BACKGROUND/OBJECTIVE: Inter-hospital patient transfers for neurocritical care are increasingly common due to increased regionalization for acute care, including stroke and intracerebral hemorrhage. This process of transfer is uniquely vulnerable to errors and risk given numerous handoffs involving multiple providers, from several disciplines, located at different institutions. We present failure mode and effect analysis (FMEA) as a systems engineering methodology that can be applied to neurocritical care transitions to reduce failures in communication and improve patient safety. Specifically, we describe our local implementation of FMEA to improve the safety of inter-hospital transfer for patients with intracerebral and subarachnoid hemorrhage as evidence of success.

METHODS: We describe the conceptual basis for and specific use-case example for each formal step of the FMEA process. We assembled a multi-disciplinary team, developed a process map of all components required for successful transfer, and identified "failure modes" or errors that hinder completion of each subprocess. A risk or hazard analysis was conducted for each failure mode, and ones of highest impact on patient safety and outcomes were identified and prioritized for implementation. Interventions were then developed and implemented into an action plan to redesign the process. Importantly, a comprehensive evaluation method was established to monitor outcomes and reimplement interventions to provide for continual improvement.

RESULTS: This intervention was associated with significant reductions in emergency department (ED) throughput (ED length of stay from 300 to 149 min, (p < .01), and improvements in inter-disciplinary communication (increase from pre-intervention (10%) to post- (64%) of inter-hospital transfers where the neurological intensive care unit and ED attendings discussed care for the patient prior to their arrival).

CONCLUSIONS: Application of the FMEA approach yielded meaningful and sustained process change for patients with neurocritical care needs. Utilization of FMEA as a change instrument for quality improvement is a powerful tool for programs looking to improve timely communication, resource utilization, and ultimately patient safety.

来源:Neurocrit Care,查看原文。版权归原作者所有。

参考来源

  1. Chilakamarri P, Finn EB, Sather J, et al. Failure Mode and Effect Analysis: Engineering Safer Neurocritical Care Transitions. Neurocrit Care. 2021. PMID: 33403581. doi:10.1007/s12028-020-01160-6

供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。