三维打印呼吸机:COVID-19供应短缺的快速解决方案
本文为综述,分析COVID-19疫情期间呼吸机技术快速发展的现状,重点介绍3D打印呼吸机CRISIS作为新型解决方案。文章汇总已发表文献和政府指南,描述FDA缩短审批时限至数周并发布紧急使用授权,授权设备从自动气囊技术到改造睡眠呼吸暂停机不等。3D打印呼吸机可能增加美国和国外的呼吸机可用数量,动态吸收大量住院患者。
要点
- COVID-19对肺功能造成严重损害,导致全球呼吸机供应链承受巨大压力,医院涌入大量需要强化呼吸支持的患者。
- 美国已形成联盟以快速制造新设备,用最少资源提供一致且安全的呼吸支持。
- FDA针对新设备或改造设备发布紧急使用授权,将审批时间从数年缩短至数周。
- 授权设备复杂度差异很大,从自动气囊技术到改造的睡眠呼吸暂停机不等。
- 3D打印呼吸机如CRISIS提出潜在解决方案,可能增加美国和国外的呼吸机可用数量。
适用人群与场景
- 原文未提及
诊断标准与关键阈值
- 原文未提及
处置流程与药物剂量
- 原文未提及
红旗征与不能漏的情况
- 原文未提及
研究设计与关键结果
- 综述汇总已发表文章、文献和政府指南,分析呼吸机技术与COVID-19生理学的相关性,由所有作者共同综合。
- FDA发布紧急使用授权,将新设备或改造设备的审批时间从数年缩短至数周。
- 授权设备复杂度差异大,从自动气囊技术到改造的睡眠呼吸暂停机不等。
- 3D打印呼吸机如CRISIS提出潜在解决方案,可增加美国和国外的呼吸机可用数量,动态吸收大量住院患者。
证据类型、等级与局限
- 证据类型:综述;原文未给出证据等级或推荐强度。
- 原文未述局限性。
对床旁实践的改变
- 可能改变的做法:在COVID-19呼吸机供应短缺时,可关注FDA紧急使用授权设备及3D打印呼吸机(如CRISIS)作为增加呼吸机数量的潜在选项。
- 原文未提及适用与不适用人群或常见陷阱。
指南或共识出处
- 原文未提及
以上提炼依据论文摘要(全文未开放获取,或许可不允许翻译转载);全文请点「阅读原文」。
英文原文(摘要)· 点击展开
OBJECTIVE: To examine rapidly emerging ventilator technologies during coronavirus disease 2019 and highlight the role of CRISIS, a novel 3D printed solution.
DATA SOURCES: Published articles, literature, and government guidelines that describe and review emergency use ventilator technologies.
STUDY SELECTION: Literature was chosen from peer-reviewed journals and articles were limited to recent publications.
DATA EXTRACTION: All information regarding ventilator technology was extracted from primary sources.
DATA SYNTHESIS: Analysis of technology and relevance to coronavirus disease 2019 physiology was collectively synthesized by all authors.
CONCLUSIONS: The coronavirus disease 2019 pandemic has placed massive stress on global supply chains for ventilators due to the critical damage the virus causes to lung function. There is an urgent need to increase supply, as hospitals become inundated with patients requiring intensive respiratory support. Coalitions across the United States have formed in order to create new devices that can be manufactured quickly, with minimal resources, and provide consistent and safe respiratory support. Due to threats to public health and the vulnerability of the U.S. population, the Food and Drug Administration released Emergency Use Authorizations for new or repurposed devices, shortening the approval timeline from years to weeks. The list of authorized devices varies widely in complexity, from automated bagging techniques to repurposed sleep apnea machines. Three-dimensional printed ventilators, such as "CRISIS," propose a potential solution to increase the available number of vents for the United States and abroad, one that is dynamic and able to absorb the massive influx of hospitalized patients for the foreseeable future.
参考来源
- Nacharaju D, Menzel W, Fontaine E, et al. Three-Dimensional Printed Ventilators: A Rapid Solution to Coronavirus Disease 2019-Induced Supply-Chain Shortages. Crit Care Explor. 2020. PMID: 33063030. doi:10.1097/CCE.0000000000000226
供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。