俯卧位头部辅助支撑装置的设计
俯卧位通气是肺保护性通气的重要策略,但属非生理体位,实施和管理不当可导致压力性损伤、面部水肿、非计划性拔管和(或)再插管甚至窒息等严重不良事件。目前临床主要采用预防和保护性策略管理俯卧位通气相关并发症,增加医护人员工作量和耗材使用,也增加患者医疗费用。为克服上述问题,天津市第三中心医院重症医学科医护人员设计了一种俯卧位头部辅助支撑装置,并获得国家实用新型专利(专利号:ZL 2022 2 1751906.3)。该装置由环形板、折叠板、支撑架、反光镜和轮体组成,可减少头部和面部皮肤压力,同时根据患者体位使口、鼻、眼、耳暴露于环形板镂空处,并通过下方反光镜观察患者面部或侧面皮肤;通过调节支撑架调整环形板高度、抬高头部以减轻面部水肿;条形槽、通孔和挂钩的设置可整理面部管路、保持引流通畅、防止导管移位和非计划性拔管,具有一定临床推广和实用价值。
要点
- 俯卧位通气为非生理体位,实施和管理不当可导致压力性损伤、面部水肿、非计划性拔管和(或)再插管甚至窒息等严重不良事件。
- 该装置由环形板、折叠板、支撑架、反光镜和轮体组成,可减少头部和面部皮肤压力,并使口、鼻、眼、耳暴露于环形板镂空处。
- 通过下方反光镜可观察患者面部或侧面皮肤;通过调节支撑架调整环形板高度、抬高头部以减轻面部水肿。
- 条形槽、通孔和挂钩可整理面部管路、保持引流通畅、防止导管移位和非计划性拔管。
- 该装置由天津市第三中心医院重症医学科医护人员设计,获国家实用新型专利(专利号:ZL 2022 2 1751906.3),作者认为具有一定临床推广和实用价值。
适用人群与场景
- 接受俯卧位通气(PPV)的患者,尤其适用于需要管理俯卧位相关头面部并发症的ICU患者。
红旗征与不能漏的情况
- 俯卧位通气实施和管理不当可导致压力性损伤、面部水肿、非计划性拔管和(或)再插管,甚至窒息等严重不良事件。
研究设计与关键结果
- 天津市第三中心医院重症医学科医护人员设计俯卧位头部辅助支撑装置,获国家实用新型专利(专利号:ZL 2022 2 1751906.3)。
- 装置由环形板、折叠板、支撑架、反光镜和轮体组成。
- 装置可减少头部和面部皮肤压力,同时根据患者体位使口、鼻、眼、耳暴露于环形板镂空处。
- 通过下方反光镜可观察患者面部或侧面皮肤。
- 通过调节支撑架调整环形板高度、抬高头部以减轻面部水肿。
- 条形槽、通孔和挂钩的设置可整理面部管路、保持引流通畅、防止导管移位和非计划性拔管。
证据类型、等级与局限
- 证据类型:装置设计介绍(实用新型专利),专利号 ZL 2022 2 1751906.3。
- 局限:原文未报告局限性
对床旁实践的改变
- 作者认为该装置具有一定临床推广和实用价值,可用于俯卧位通气时减少头面部皮肤压力、观察面部皮肤、抬高头部减轻面部水肿并整理面部管路。
提炼说明
- 本条依据论文摘要整理;摘要未涉及「诊断标准与关键阈值」「处置流程与药物剂量」「指南或共识出处」,故未列出这些栏目;全文请点「阅读原文」。
英文原文(摘要)· 点击展开
Prone position ventilation (PPV) is an important protective strategy for lung ventilation, widely used in clinical practice, especially since the novel coronavirus infection pandemic. Since PPV is a non-physiological position, improper implementation and management can lead to serious adverse events such as pressure injury, facial edema, unplanned extubation and (or) reintubation, and even asphyxia. At present, preventive and protective strategies are mainly used to manage PPV-related complications in clinical practice. These strategies not only increase the workload of medical staff and the use of consumables, but also increase the medical cost of patients, further burdening patients and their families economically. To overcome the above problems, the medical staff of the department of critical care medicine of Tianjin Third Central Hospital designed a prone position head auxiliary support device and obtained a national utility model patent (patent number: ZL 2022 2 1751906.3). The device consists of annular plate, folding plate, support frame, reflector and wheel bodies. It serves to reduce pressure on the head and facial skin, while also exposing the mouth, nose, eyes, and ears to the hollow position of the annular plate according to the patient's position. At the same time, the patient's face or side skin can be observed through the lower reflector. The height of the annular plate was adjusted by adjusting the support frame, and the head was raised to reduce facial edema. The setting of strip groove, through hole and hook can sort out the facial pipeline, keep the drainage unobstructed, prevent catheter displacement and unplanned extubation, and has certain clinical promotion and practical value.
参考来源
- Li X, Ni W, Huo W, et al. [Design of a head auxiliary support device in prone position]. Zhonghua Wei Zhong Bing Ji Jiu Yi Xue. 2025. PMID: 40202003. doi:10.3760/cma.j.cn121430-20240723-00625
供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。