俯卧位通气头架的设计与应用
急性呼吸窘迫综合征和重症肺炎所致呼吸衰竭是重症医学科常见疾病,俯卧位通气在临床广泛应用,但明显增加医务人员工作量及意外拔管、压力性损伤风险。现有床垫等装置中专门保护固定头面部的器械很少,遵义医科大学附属医院医务人员设计开发了俯卧位通气头架并获国家实用新型专利(专利号:ZL 2018 2 0056891.6)。该头架含可移动底盘和滚轮、可调节高度的伸缩柱1、横桥与旋转环、充气气囊、滑杆及伸缩柱2、伸缩柱3与导管夹,可安全保护俯卧位患者头部并大幅减少医务人员工作量。
要点
- 俯卧位通气对急性呼吸窘迫综合征和重症肺炎所致呼吸衰竭有良好治疗效果,已广泛应用于临床。
- 俯卧位通气明显增加医务人员工作量及意外拔管、压力性损伤风险,影响诊疗安全。
- 现有床垫等装置中专门保护固定头面部的器械很少,该头架填补此空白并获国家实用新型专利(ZL 2018 2 0056891.6)。
- 头架含可移动底盘与滚轮便于移动固定,伸缩柱1可依患者体位自由调节高度。
- 旋转环上方设充气气囊提高舒适度、减少面部皮肤压力性损伤,伸缩柱3远端导管夹便于固定人工气道和机械通气管道。
适用人群与场景
- 重症医学科因急性呼吸窘迫综合征和重症肺炎导致呼吸衰竭、需行俯卧位通气的患者。
处置流程与药物剂量
- 头架由可移动底盘和滚轮组成,便于移动和固定。
- 伸缩柱1垂直固定于可移动底盘上,其高度可根据患者位置自由调节。
- 伸缩柱1顶部固定横桥,桥两端设计凸起,横桥上方固定旋转环,使旋转环可沿桥按一定角度旋转。
- 旋转环设计内环及可供管道穿过的进出口,旋转环上方设计充气气囊以提高患者舒适度并减少面部皮肤压力性损伤。
- 伸缩柱1上部垂直设计滑杆,滑杆远端设伸缩柱2并与旋转环连接,使旋转环随伸缩柱2收缩沿横桥调节角度。
- 滑杆中部设伸缩柱3,其远端设导管夹,便于固定人工气道和机械通气管道。
研究设计与关键结果
- 遵义医科大学附属医院医务人员设计开发俯卧位通气头架,获国家实用新型专利(专利号:ZL 2018 2 0056891.6)。
- 该头架可于俯卧位安全保护患者头部,并大幅减少医务人员工作量。
证据类型、等级与局限
- 证据类型:器械设计与应用描述(获国家实用新型专利,专利号:ZL 2018 2 0056891.6)。
- 局限:原文未报告局限性。
对床旁实践的改变
- 作者认为该头架实用方便,可在俯卧位时安全保护患者头部,并大幅减少医务人员工作量。
提炼说明
- 本条依据论文摘要整理;摘要未涉及「诊断标准与关键阈值」「红旗征与不能漏的情况」「指南或共识出处」,故未列出这些栏目;全文请点「阅读原文」。
英文原文(摘要)· 点击展开
Respiratory failure caused by acute respiratory distress syndrome and severe pneumonia is common diseases in intensive care medicine. In recent years, with the continuous updating of treatment methods, prone position ventilation has been found to have a good therapeutic effect on such diseases, and has been widely used in clinical practice. However, prone position ventilation significantly increases the workload of medical staff and the risk of accidental extubation and pressure injuries to patients, seriously affecting the safety of diagnosis and treatment. At present, various devices such as mattresses have been used for prone position ventilation, but there are few devices specifically designed to protect and fix the head and face. Therefore, the medical staff of Affiliated Hospital of Zunyi Medical University designed and developed a head support frame for prone position ventilation, and obtained a National Utility Model Patent of China (patent number: ZL 2018 2 0056891.6). The head support frame for prone position ventilation includes a movable chassis and rollers for easy movement and fixation. The retractable column 1 is vertically fixed on the movable chassis, and its height can be freely adjusted according to the position of the patient. A transverse bridge is fixed at the top of the retractable column 1, the two ends of the bridge are designed a bulge, and the rotating ring is fixed above the transverse bridge, so that the rotating ring can rotate along the bridge at a certain angle. The rotating ring is designed with an inner ring and an inlet and outlet which can pass through the tube is designed on the rotating ring. The inflatable air bag is designed above the rotating ring to improve the comfort of patients and reduce the pressure injury of facial skin. A sliding rod is vertically designed on the upper part of the retractable column 1, and there is a retractable column 2 at the distal end of the slide rod, and the retractable column 2 is connected with the rotating ring, so that the rotating ring adjusts the angle along the cross bridge with the contraction of the collapsible column 2. A retractable column 3 is arranged in the middle of the slide rod, and a catheter clamp is arranged at its far end to facilitate the fixation of the artificial airway and the mechanical ventilation tube. The support frame is practical and convenient, which can protect the patient's head safely in the prone position, and greatly reduce the workload of medical staff.
参考来源
- Wang Y, Wu J, Li X, et al. [Design and application of a head support frame for prone position ventilation]. Zhonghua Wei Zhong Bing Ji Jiu Yi Xue. 2024. PMID: 39238413. doi:10.3760/cma.j.cn121430-20231120-00994
供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。