基于临床输入变量的机械非均匀肺泡应力与应变:一个简单的概念模型
该文为概念模型文章,将作者已发表的均匀球形肺单位模型扩展至非均匀条件,描述在静态条件下,球表面不同顺应性段之间界面边界处应力和应变(面积变化)的放大。作者认为,临床医生目前监测气道开口压力和容积并假设其与微观应力应变密切相关,这一假设是当前肺保护性通气策略的基础;但在机械非均匀的ARDS肺中,即使静态气道压处处相同,组织内应力并不相同。估计实际组织应力应变需考虑肺单位张力、应力聚焦和周期内功率集中,结合可测量的通气功率,可能有助于评估所施加压力和功率的VILI风险。
要点
- 临床监测气道开口压力和容积并假设其反映微观应力应变,是当前肺保护性通气的基础,但在非均匀ARDS肺中该假设不成立。
- 静态条件下气道压可能处处相同,但机械非均匀ARDS肺内组织应力并不相同。
- 估计非均匀环境中的实际组织应力应变,需考虑肺单位张力、应力聚焦和周期内功率集中,而不仅是气道压、潮气量和总机械功率。
- 将可测量的通气功率与应力放大概念结合,可能帮助评估所施加压力和功率的VILI风险。
适用人群与场景
- 机械通气的ARDS患者,尤其是肺机械非均匀者。
研究设计与关键结果
- 本文为概念模型文章,将已发表的均匀球形肺单位模型扩展至非均匀条件,描述静态条件下球表面不同顺应性段之间界面边界处应力和应变(面积变化)的放大。
- 作者认为,估计机械非均匀环境中实际组织应力应变需考虑肺单位张力、应力聚焦和周期内功率集中,这些因素超出气道压、潮气量和总机械功率的测量。
- 结合可测量的通气功率和应力放大概念,可能有助于评估所施加压力和功率的VILI风险。
证据类型、等级与局限
- 证据类型:概念模型(作者称为thought exercise)。
- 局限:原文未报告局限性。
对床旁实践的改变
- 作者认为,临床医生需考虑肺单位张力、应力聚焦和周期内功率集中等变量,以更好定义VILI风险。
- 作者认为,结合可测量的通气功率和应力放大概念,可能有助于评估所施加压力和功率的VILI风险。
提炼说明
- 本条依据论文摘要整理;摘要未涉及「诊断标准与关键阈值」「处置流程与药物剂量」「红旗征与不能漏的情况」「指南或共识出处」,故未列出这些栏目;全文请点「阅读原文」。
英文原文(摘要)· 点击展开
Clinicians currently monitor pressure and volume at the airway opening, assuming that these observations relate closely to stresses and strains at the micro level. Indeed, this assumption forms the basis of current approaches to lung protective ventilation. Nonetheless, although the airway pressure applied under static conditions may be the same everywhere in healthy lungs, the stresses within a mechanically non-uniform ARDS lung are not. Estimating actual tissue stresses and strains that occur in a mechanically non-uniform environment must account for factors beyond the measurements from the ventilator circuit of airway pressures, tidal volume, and total mechanical power. A first conceptual step for the clinician to better define the VILI hazard requires consideration of lung unit tension, stress focusing, and intracycle power concentration. With reasonable approximations, better understanding of the value and limitations of presently used general guidelines for lung protection may eventually be developed from clinical inputs measured by the caregiver. The primary purpose of the present thought exercise is to extend our published model of a uniform, spherical lung unit to characterize the amplifications of stress (tension) and strain (area change) that occur under static conditions at interface boundaries between a sphere's surface segments having differing compliances. Together with measurable ventilating power, these are incorporated into our perspective of VILI risk. This conceptual exercise brings to light how variables that are seldom considered by the clinician but are both recognizable and measurable might help gauge the hazard for VILI of applied pressure and power.
参考来源
- Marini JJ, Rocco PRM, Thornton LT, et al. Stress & strain in mechanically nonuniform alveoli using clinical input variables: a simple conceptual model. Crit Care. 2024. PMID: 38679712. doi:10.1186/s13054-024-04918-y
供执业医师抢救与诊疗参考,不替代临床判断;剂量请结合体重、肝肾功能和本院药品规格复核,以指南原文为准。