文献速递慢阻肺哮喘

基于定量CT与机器学习区分慢阻肺与哮喘

Differentiating COPD and asthma using quantitative CT imaging and machine learning.
PubMed 文献 · Eur Respir J · 2022-09-22

该研究从海德堡大学医院招募48例慢阻肺和47例哮喘患者,提取93个CT影像特征,用混合特征选择和支持向量机分类。模型纳入全部CT特征时准确度80%、F1分数81%,仅用7个CT特征即可中高准确度区分慢阻肺与哮喘。

要点

  • CT特征联合机器学习可用于区分慢阻肺与哮喘,全特征模型准确度80%。
  • 最优特征子集仅含7个CT特征,包括LAA950、气道周长、TAC等。
  • 仅用气道特征时准确度降至66%,提示肺气肿特征有附加价值。

核心结论

  • 仅用7个CT特征即可用机器学习以中高准确度区分慢阻肺与哮喘。

研究设计与样本

  • 从海德堡大学医院招募48例慢阻肺和47例哮喘患者,提取93个CT特征,采用混合特征选择和支持向量机分类。

主要发现

  • 全CT特征模型准确度80%、F1分数81%;仅气道特征模型准确度66%、F1分数68%。
  • 全模型 top 特征包括 LAA950、外气道周长、内气道周长、TAC、RB1外气道面积、RB1内气道面积和LAC总孔数。
  • 仅气道模型 top 特征包括 RB1内气道面积、LB1外气道面积、外气道周长、内气道周长、Pi10、TAC、RB1气道壁厚度和LB10 TAC。
  • 慢阻肺与哮喘组间年龄(p=0.25)和FEV1(p=0.31)无差异。

临床怎么用

  • 对于难以鉴别的慢阻肺与哮喘患者,可考虑定量CT特征联合机器学习辅助区分。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: There are similarities and differences between chronic obstructive pulmonary disease (COPD) and asthma patients in terms of computed tomography (CT) disease-related features. Our objective was to determine the optimal subset of CT imaging features for differentiating COPD and asthma using machine learning. METHODS: COPD and asthma patients were recruited from Heidelberg University Hospital (Heidelberg, Germany). CT was acquired and 93 features were extracted: percentage of low-attenuating area below -950 HU (LAA950), low-attenuation cluster (LAC) total hole count, estimated airway wall thickness for an idealised airway with an internal perimeter of 10 mm (Pi10), total airway count (TAC), as well as airway inner/outer perimeters/areas and wall thickness for each of five segmental airways, and the average of those five airways. Hybrid feature selection was used to select the optimum number of features, and support vector machine learning was used to classify COPD and asthma. RESULTS: 95 participants were included (n=48 COPD and n=47 asthma); there were no differences between COPD and asthma for age (p=0.25) or forced expiratory volume in 1 s (p=0.31). In a model including all CT features, the accuracy and F1 score were 80% and 81%, respectively. The top features were: LAA950, outer airway perimeter, inner airway perimeter, TAC, outer airway area RB1, inner airway area RB1 and LAC total hole count. In the model with only CT airway features, the accuracy and F1 score were 66% and 68%, respectively. The top features were: inner airway area RB1, outer airway area LB1, outer airway perimeter, inner airway perimeter, Pi10, TAC, airway wall thickness RB1 and TAC LB10. CONCLUSION: COPD and asthma can be differentiated using machine learning with moderate-to-high accuracy by a subset of only seven CT features.

来源:Eur Respir J,查看原文。版权归原作者所有。

引用

  1. Moslemi A, Kontogianni K, Brock J, et al. Differentiating COPD and asthma using quantitative CT imaging and machine learning. Eur Respir J. 2022. PMID: 35210316. doi:10.1183/13993003.03078-2021

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。