人胚胎培养系统中影响培养基蒸发与渗透压的因素
该研究在人类胚胎培养背景下,分析培养液成分与补充、矿物油体积、培养箱加湿、培养皿与培养箱类型等因素对培养基蒸发和渗透压的影响。结果显示,培养箱湿度、矿物油体积、培养基类型以及延时培养皿设计是影响蒸发和渗透压的重要参数;蛋白补充未见显著影响。初始渗透压较高的培养基在培养中达到高渗水平的风险更大。
要点
- 培养箱湿度、矿物油体积和培养基类型是影响渗透压稳定的重要参数。
- 延时培养皿的设计及其推荐准备方案显著影响蒸发率,并受培养箱特性影响。
- 初始渗透压较高的培养基在培养过程中达到高渗水平的风险更大。
核心结论
- 培养箱湿度、矿物油体积、培养基类型和延时培养皿设计可影响人胚胎培养中的培养基蒸发与渗透压。
- 蛋白补充未显著影响蒸发。
- 初始渗透压较高的培养基在培养中达到高渗水平的风险更大。
研究设计与样本
- 研究比较了培养基成分与补充、矿物油体积、培养箱加湿以及培养皿和培养箱类型等变量。
- 另比较了六种不同设计的延时培养皿模型在防止蒸发方面的能力。
- 培养期间每日测量渗透压,并采用线性回归分析蒸发率。
主要发现
- 蛋白补充未显著影响蒸发。
- 培养箱内湿度水平、矿物油体积和培养基类型在渗透压稳定中起重要作用。
- 延时培养皿的设计及其推荐准备方案强烈影响其蒸发率,且蒸发率进一步受各培养箱特性影响。
- 初始渗透压较高的培养基在培养过程中达到高渗水平的风险更大。
临床怎么用
- 分析培养系统和方法学时,应关注培养箱湿度、矿物油体积、培养基类型及延时培养皿设计与准备方案。
- 应重视培养过程中渗透压的稳定,避免培养基达到高渗水平。
- 研究结果对设计IVF耗材的制造商也具有参考价值。
局限性
- 研究的变量虽多但有限,其他因素也可能影响渗透压动态。
- 不可控的大气因素可能导致不同中心和实验室之间观察结果存在差异。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
STUDY QUESTION: Which lab-related factors impact the culture system's capacity to maintain a stable osmolality during human embryo culture? SUMMARY ANSWER: Incubator humidity, the volume of mineral oil, the type of culture media and the design of time-lapse dishes have been identified as important parameters that can cause an impact on media evaporation and consequently osmolality during culture. WHAT IS KNOWN ALREADY: Culture medium is a critical component in human embryo culture. Minimizing its evaporation during culture is an adequate strategy to stabilize osmolality and, as a result, improving culture conditions and clinical outcomes. STUDY DESIGN, SIZE, DURATION: The studied variables included media composition and supplementation; volume of mineral oil; incubator humidification; and the type of dish and incubator used. Additionally, six time-lapse dish models were compared in their ability to prevent evaporation. PARTICIPANTS/MATERIALS, SETTING, METHODS: Dishes were incubated in parallel to analyze osmolality during culture between groups: synthetic oviductal medium enriched with potassium versus human tubal fluid medium; protein versus no protein supplementation; dry versus humid atmosphere; high versus low volume of mineral oil. Additionally, media evaporation was compared between six models of time-lapse dishes with distinct designs, cultured in a joint incubator. Two of them were retested in their corresponding incubator to analyze the dish-incubator fit. Daily osmolality measurements were compared between groups. Linear regression was performed to analyze evaporation rates. MAIN RESULTS AND THE ROLE OF CHANCE: Protein supplementation did not significantly affect evaporation. Contrarily, humidity levels inside the incubators, the volume of mineral oil and the type of culture media, played an important role in osmolality stabilization. The design of time-lapse dishes and their recommended preparation protocol heavily influenced their evaporation rates, which were further altered by each incubator's characteristics. Media with initially high osmolalities had a bigger risk of reaching hypertonic levels during culture. LIMITATIONS, REASONS FOR CAUTION: While numerous, the studied variables are limited and therefore other factors could play a role in osmolality dynamics, as well. Incontrollable atmospheric factors could also result in some variation in the observed results between different centers and laboratories. WIDER IMPLICATIONS OF THE FINDINGS: Published literature has extensively described how hypertonic media may impair embryo development and negatively affect clinical outcomes; therefore, maintaining a stable osmolality during culture should be considered essential. This work is of interest both for embryologists when analyzing their culture system and methodologies, as well as manufacturers in charge of designing IVF consumables. STUDY FUNDING/COMPETING INTEREST(S): This study was privately funded. TRIAL REGISTRATION NUMBER: N/A.
引用
- Mestres E, García-Jiménez M, Casals A, et al. Factors of the human embryo culture system that may affect media evaporation and osmolality. Hum Reprod. 2021. PMID: 33458748. doi:10.1093/humrep/deaa370
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。