经会阴超声检查胎头塑形及其与胎方位和分娩方式的关联
本研究对150例第二产程活跃期进展缓慢、临床考虑手术干预的初产妇进行会阴超声二次分析,排除6例胎方位不明者后纳入144例。超声可对胎头塑形进行分类;枕部-顶部塑形常见于枕前位,且与分娩方式无显著关联,而额部-顶部和顶部-顶部塑形较少见。
要点
- 经会阴二维和三维超声可对胎头塑形进行分类,包括枕部-顶部、额部-顶部及顶部-顶部塑形。
- 144例中79例(55%)观察到塑形,枕前位塑形比例(69/117,59%)高于非枕前位(10/27,37%),P=.04。
- 枕前位中塑形与分娩方式无显著关联(P=.13);额部-顶部或顶部-顶部塑形的11例中仅1例自然分娩。
核心结论
- 超声可区分不同类型的胎头塑形;枕部-顶部塑形常见于枕前位,且与分娩方式无显著关联;额部-顶部和顶部-顶部塑形的发生率低于旧研究报道,作者认为应在更大规模、混合族裔人群中进一步研究。
研究设计与样本
- 本研究为对150例单胎头位、第二产程活跃期用力进展缓慢、临床考虑手术干预的初产妇人群的二次分析,排除6例胎方位不明者后纳入144例;在储存的经会阴二维和三维超声图像上评估塑形,临床医生对超声结果设盲。
主要发现
- 144例中胎方位为枕前位117例、横位12例、枕后位15例;79/144(55%)观察到塑形。
- 枕前位塑形69/117(59%)高于非枕前位10/27(37%),P=.04。
- 枕前位中,枕部-顶部塑形68/69例,1例为仰伸姿势的顶部-顶部塑形。
- 枕前位中塑形者在自然分娩组为19/38(50%)、真空吸引助产组为42/71(59%)、真空吸引失败组为7/8(88%),P=.13。
- 枕后位中4例诊断顶部-顶部塑形,其中真空吸引成功3例、失败1例;额部-顶部塑形见于2例横位和4例枕后位,其中1例自然分娩、真空吸引失败3例、成功2例。
局限性
- 原文指出额部-顶部和顶部-顶部塑形的发生率低于旧研究报道,并认为应在更大规模、混合族裔人群中进一步研究;原文未报告其他局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: To accommodate passage through the birth canal, the fetal skull is compressed and reshaped, a phenomenon known as molding. The fetal skull bones are separated by membranous sutures that facilitate compression and overlap, resulting in a reduced diameter. This increases the probability of a successful vaginal delivery. Fetal position, presentation, station, and attitude can be examined with ultrasound, but fetal head molding has not been previously studied with ultrasound. OBJECTIVE: This study aimed to describe ultrasound-assessed fetal head molding in a population of nulliparous women with slow progress in the second stage of labor and to study associations with fetal position and delivery mode. STUDY DESIGN: This was a secondary analysis of a population comprising 150 nulliparous women with a single fetus in cephalic presentation, with slow progress in the active second stage with pushing. Women were eligible for the study when an operative intervention was considered by the clinician. Molding was examined in stored transperineal two-dimensional and three-dimensional acquisitions and differentiated into occipitoparietal molding along the lambdoidal sutures, frontoparietal molding along the coronal sutures, and parietoparietal molding at the sagittal suture (molding in the midline). Molding could not be classified if positions were unknown, and these cases were excluded. We measured the distance from the molding to the head midline, molding step, and overlap of skull bones and looked for associations with fetal position and delivery mode. The responsible clinicians were blinded to the ultrasound findings. RESULTS: Six cases with unknown position were excluded, leaving 144 women in the study population. Fetal position was anterior in 117 cases, transverse in 12 cases, and posterior in 15 cases. Molding was observed in 79 of 144 (55%) fetuses. Molding was seen significantly more often in occiput anterior positions than in non-occiput anterior positions (69 of 117 [59%] vs 10 of 27 [37%]; P=.04). In occiput anterior positions, the molding was seen as occipitoparietal molding in 68 of 69 cases and as parietoparietal molding in 1 case with deflexed attitude. Molding was seen in 19 of 38 (50%) of occiput anterior positions ending with spontaneous delivery, 42 of 71(59%) ending with vacuum extraction, and in 7 of 8 (88%) with failed vacuum extraction (P=.13). In 4 fetuses with occiput posterior positions, parietoparietal molding was diagnosed, and successful vacuum extraction occurred in 3 cases and failed extraction in 1. Frontoparietal molding was seen in 2 transverse positions and 4 posterior positions. One delivered spontaneously; vacuum extraction failed in 3 cases and was successful in 2. Only 1 of 11 fetuses with either parietoparietal or frontoparietal molding was delivered spontaneously. CONCLUSION: The different types of molding can be classified with ultrasound. Occipitoparietal molding was commonly seen in occiput anterior positions and not significantly associated with delivery mode. Frontoparietal and parietoparietal moldings were less frequent than reported in old studies and should be studied in larger populations with mixed ethnicities.
引用
- Iversen JK, Kahrs BH, Torkildsen EA, et al. Fetal molding examined with transperineal ultrasound and associations with position and delivery mode. Am J Obstet Gynecol. 2020. PMID: 32585224. doi:10.1016/j.ajog.2020.06.042
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。