文献速递妇科

使用三维打印技术定制子宫托

Customized Pessary Fabrication Using Three-Dimensional Printing Technology.
PubMed 文献 · Obstet Gynecol · 2018-01-01

本文报告一例压力性尿失禁(SUI)患者,因商用子宫托试配失败而希望非手术治疗,使用三维打印机和聚乳酸线材制作模具,定制医用级硅胶子宫托。硅胶子宫托阴道内放置48小时,患者无不适或漏尿,咳嗽、打喷嚏或用力时未脱出,取出后窥器检查上皮正常。作者认为三维打印子宫托可行,其用途可能扩展至解剖与商用子宫托不兼容的患者。

要点

  • 商用子宫托试配失败的压力性尿失禁患者,可考虑定制三维打印硅胶子宫托。
  • 定制硅胶子宫托阴道内放置48小时,患者无不适或漏尿,咳嗽、打喷嚏或用力时未脱出。
  • 取出后窥器检查显示上皮正常。

核心结论

  • 作者报告一例压力性尿失禁患者成功置入定制三维打印子宫托,认为三维打印子宫托可行,其用途可能扩展至解剖与商用子宫托不兼容的患者。

研究设计与样本

  • 本文为病例报告,报告一例压力性尿失禁且商用子宫托试配失败、希望非手术治疗的患者。

主要发现

  • 使用三维打印机和聚乳酸线材制作模具,为患者定制医用级硅胶子宫托。
  • 硅胶子宫托阴道内放置48小时,患者未报告任何不适或漏尿。
  • 子宫托在咳嗽、打喷嚏或用力时未脱出。
  • 取出后窥器检查显示上皮正常。

临床怎么用

  • 作者认为三维打印子宫托可行,其用途可能扩展至解剖与商用子宫托不兼容的患者。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Pessaries are a treatment option for pelvic organ prolapse, stress urinary incontinence (SUI), and cervical incompetence. An effective pessary is comfortable, corrects the presenting problem, does not cause adverse effects, and is easy to remove. Discomfort and poor fit limit the usefulness of pessaries for many women. Each patient presents with unique anatomy and thus the effectiveness of commercially available pessaries may be limited by lack of customization. METHOD: A patient presenting with SUI and failed commercial pessary fittings desired nonsurgical treatment. Using a mold fabricated with a three-dimensional printer and polylactic acid filament, a medical-grade silicone pessary was custom-made for the patient. EXPERIENCE: The silicone pessary was placed vaginally in the patient for a period of 48 hours. The patient did not report any discomfort or bladder leakage. In addition, the pessary did not dislodge with coughing, sneezing, or straining. After removal, a speculum examination showed normal epithelium. CONCLUSION: We report the successful insertion of a customized three-dimensional-printed pessary in a patient with SUI. Three-dimensional-printed pessaries are feasible and their utility may extend to the patient with anatomy incompatible with commercially available pessaries.

来源:Obstet Gynecol,查看原文。版权归原作者所有。

引用

  1. Barsky M, Kelley R, Bhora FY, et al. Customized Pessary Fabrication Using Three-Dimensional Printing Technology. Obstet Gynecol. 2018. PMID: 29420400. doi:10.1097/AOG.0000000000002461

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。