文献速递妇科

机器人妇科手术废弃物审计:一项试点研究

Waste Audit of Robotic Gynecologic Surgery: A Pilot Study.
PubMed 文献 · J Minim Invasive Gynecol · 2025-08-31

该试点研究对一家学术机构的20例机器人妇科手术(含子宫切除术10例、子宫肌瘤剔除术6例、输卵管/卵巢/子宫内膜异位症手术4例)进行废弃物审计与生命周期影响评估,共产生367.02 kg城市固体废物和9.68 kg管制医疗废物,平均每例18.35 kg(SD 2.63)和0.48 kg(SD 0.52),无管制医疗废物符合生物危害标准。作者提出减少环境影响的策略包括重组手术套件、增加单次使用器械再处理、正确分类可回收物、合理使用管制医疗废物流程、对较简单病例考虑替代手术方式以及探索棉制品和纺粘-熔喷-纺粘聚丙烯产品的可重复使用或更环保替代品。

要点

  • 20例机器人妇科手术平均每例产生城市固体废物18.35 kg(SD 2.63)、管制医疗废物0.48 kg(SD 0.52)。
  • 无管制医疗废物符合生物危害标准。
  • 棉制品占总废物重量5%,但在某一影响类别中贡献近三分之一。

核心结论

  • 减少机器人妇科手术环境影响的策略包括重组手术套件以避免不必要打开不常用物品、增加单次使用器械再处理、正确分类可回收塑料和纸制品、合理使用管制医疗废物流程、对较简单病例考虑替代手术方式以及探索棉制品和纺粘-熔喷-纺粘聚丙烯产品的可重复使用或更环保替代品。

研究设计与样本

  • 废弃物审计与机器人妇科手术生命周期影响评估,在单一学术机构进行,共20例机器人妇科手术,包括子宫切除术10例、子宫肌瘤剔除术6例、输卵管、卵巢或子宫内膜异位症手术4例。

主要发现

  • 20例审计病例共产生367.02 kg城市固体废物和9.68 kg管制医疗废物,平均每例城市固体废物18.35 kg(SD 2.63)、管制医疗废物0.48 kg(SD 0.52)。
  • 按重量计算最大贡献者为由纺粘-熔喷-纺粘聚丙烯制成的手术衣和铺巾。
  • 平均每例丢弃可回收塑料0.59 kg(SD 0.25)和电池11.85节(SD 4.09)作为城市固体废物。
  • 无管制医疗废物符合生物危害标准。
  • 未使用的手术用品占每例废物1.11 kg(SD 0.56);每例平均每分钟手术时间产生0.70 kg二氧化碳当量(SD 0.27),较短手术每分钟产生最多排放;棉制品占总废物重量5%,但在某一影响类别中贡献近三分之一。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

STUDY OBJECTIVE: To quantify and characterize waste generated in robotic gynecologic surgery and assess its environmental impact, with the goal of identifying strategies to reduce waste and improve sustainability. DESIGN: Waste audit and life cycle impact assessment of robotic gynecologic surgery. SETTING: Single academic institution. PATIENTS: Twenty robotic gynecologic surgery cases, including hysterectomies (n = 10), myomectomies (n = 6), and tubal, ovarian, or endometriosis surgeries (n = 4). INTERVENTIONS: A detailed waste audit of all surgical waste to categorize materials into municipal solid waste (MSW) and regulated medical waste (RMW), allowing for subsequent life cycle impact assessment. MEASUREMENTS AND MAIN RESULTS: The 20 audited cases produced 367.02 kg of MSW and 9.68 kg of RMW, averaging 18.35 kg (standard deviation, SD, 2.63 kg) of MSW and 0.48 kg (SD 0.52 kg) of RMW per case. The largest contributor by weight was surgical gowns and drapes composed of spunbond-meltblown-spunbond polypropylene. An average of 0.59 kg (SD 0.25 kg) of recyclable plastics and 11.85 batteries (SD 4.09) per case were discarded as MSW. No RMW met biohazard criteria. Unused surgical supplies accounted for 1.11 kg (SD 0.56 kg) of waste per case. Cases produced an average of 0.70 kg CO2e (SD 0.27) per minute of operative time, with shorter surgeries producing the most emissions per minute. Cotton products contributed up to almost one-third of an impact category despite accounting for 5% of the total waste by weight. CONCLUSION: Opportunities to reduce the environmental impact of robotic gynecologic surgeries include reorganizing surgical kits to avoid the unnecessary opening of commonly unused items, increasing reprocessing of single-use devices, properly sorting recyclable plastics and paper products, appropriately using RMW streams, considering alternative surgical modalities for less complex cases, and exploring reusable or more environmentally-friendly alternatives to cotton and spunbond-meltblown-spunbond polypropylene products.

来源:J Minim Invasive Gynecol,查看原文。版权归原作者所有。

引用

  1. Sasse SA, Bleasdale AC, Zaslavsky J, et al. Waste Audit of Robotic Gynecologic Surgery: A Pilot Study. J Minim Invasive Gynecol. 2025. PMID: 40897210. doi:10.1016/j.jmig.2025.08.029

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。