文献速递妇科

子宫切除术中子宫操纵器的碳足迹与成本比较分析

A Comparative Carbon Footprint and Cost Analysis of Uterine Manipulators for Hysterectomy.
PubMed 文献 · Obstet Gynecol · 2025-05-22

本研究采用生命周期评估与生命周期成本法,比较可重复使用不锈钢、两种一次性及混合型子宫操纵器在300例子宫切除术中的环境影响与成本。可重复使用不锈钢操纵器在各环境类别中碳足迹最低,一次性操纵器全球变暖排放为可重复使用型的4.24倍和2.39倍,混合型在使用15次时为3.76倍;可重复使用型前期成本最高,但300次使用相比其他器械为机构节省16000至43000美元。

要点

  • 可重复使用不锈钢子宫操纵器在所有环境类别中碳足迹最低。
  • 一次性操纵器全球变暖排放为可重复使用型的4.24倍和2.39倍,混合型在15次使用时为3.76倍。
  • 可重复使用型前期成本最高,但300次使用相比其他器械节省16000至43000美元。

核心结论

  • 可重复使用不锈钢子宫操纵器在其生命周期内相比一次性及混合型器械具有最低的碳足迹和成本。
  • 卫生保健领导层应投资可重复使用器械;临床医生应优先选择可重复使用选项;行业伙伴应创新并制造不锈钢器械以帮助医疗系统脱碳。

研究设计与样本

  • 对可重复使用不锈钢操纵器、两种一次性操纵器及一种含可重复使用和一次性部件的混合型操纵器进行生命周期评估,涵盖生产、使用和处置。
  • 数据不确定性通过蒙特卡洛分析处理。
  • 同时进行生命周期成本核算,纳入采购、灭菌和废物清除成本,排除资本设备成本;成本估算来自机构合同、劳动力、材料和能源使用。
  • 主要结局为四种子宫操纵器的环境足迹;次要比较在300例子宫切除术(约等于可重复使用操纵器的使用寿命)中生产、使用、灭菌和处置相关的全球变暖潜势(千克二氧化碳当量)和成本(美元)。

主要发现

  • 可重复使用不锈钢操纵器在每个类别中碳足迹和环境效应最低。
  • 一次性操纵器的全球变暖排放分别为可重复使用操纵器的4.24倍和2.39倍,混合型在15次使用时排放为3.76倍。
  • 可重复使用操纵器的环境影响主要来自灭菌,其他器械主要来自生产。
  • 可重复使用操纵器前期成本最高,但300次使用相比其他器械为机构节省16000至43000美元。

关键数值与推荐

  • 一次性操纵器全球变暖排放为可重复使用型的4.24倍和2.39倍(原文未分别标明具体对应哪种一次性操纵器)。
  • 混合型操纵器在15次使用时全球变暖排放为可重复使用型的3.76倍。
  • 可重复使用操纵器300次使用相比其他器械节省16000至43000美元。

临床怎么用

  • 卫生保健领导层应投资可重复使用器械。
  • 临床医生应优先选择可重复使用选项。
  • 行业伙伴应创新并制造不锈钢器械以帮助医疗系统脱碳。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: To evaluate the environmental effects and cost of four different uterine manipulators using life cycle assessment and life cycle costing. METHODS: Life cycle assessment, which evaluates the environmental effects of a product or process throughout its life cycle, including production, use, and disposal, was performed on a reusable stainless-steel manipulator, two disposable manipulators, and a hybrid manipulator with both reusable and disposable pieces. Uncertainty in data was addressed through Monte Carlo analysis. Life cycle costing was conducted concurrently, incorporating procurement, sterilization, and waste removal costs and excluding capital equipment costs. Costs were estimated from institutional contracts, labor, materials, and energy use. The primary outcome of this study was the environmental footprint of four uterine manipulators. Secondarily, we compared the global warming potential (kilograms of CO 2 -equivalents) and costs (U.S. dollars) associated with the production, use, sterilization, and disposal of these manipulators over 300 hysterectomies, the approximate life of the reusable manipulator. RESULTS: The reusable stainless-steel manipulator had the lowest carbon footprint and environmental effect in every category. The disposable manipulators had global warming emissions 4.24 and 2.39 times higher than the reusable manipulator, and the hybrid had emissions 3.76 times higher at 15 uses. Sterilization contributed most of the effects for the reusable manipulator, and production contributed the most for the other devices. The reusable manipulator had the highest up-front costs, but over 300 uses saved the institution $16,000-43,000 compared with the other devices. CONCLUSION: The reusable stainless-steel uterine manipulator had the lowest carbon footprint and cost compared with the disposable and hybrid devices over their life cycles. Health care leadership should invest in reusable devices; clinicians should prioritize reusable options; and industry partners should innovate and manufacture stainless-steel instruments to help decarbonize the health care system.

来源:Obstet Gynecol,查看原文。版权归原作者所有。

引用

  1. Melnyk AI, Silva de Souza Lima Cano N, Glass Clark S, et al. A Comparative Carbon Footprint and Cost Analysis of Uterine Manipulators for Hysterectomy. Obstet Gynecol. 2025. PMID: 40403314. doi:10.1097/AOG.0000000000005949

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。